Datasheet4U Logo Datasheet4U.com

L3092 - SLIC KIT OPTIMIZED

Datasheet Summary

Description

The SLIC KIT (L3000S/L3092) is a set of solid state devices designed to integrate many of the functions needed to interface a telephone line.

It consists of 2 integrated devices ; the L3000S line interface circuit and the L3092 control unit.

Features

  • of the BORSHT functions: - Battery feed (balance mode) - Ringing Injection - Signalling Detection December 1997 - Hybrid Function The SLIC KIT injects the ringing signal in balanced mode and requires a positive supply voltage of typically + 72V to be available on the subscriber card. The L3000S/L3092 kit generates the ringing signal internally, avoiding the requirement for expensive external circuitry. A low level 1.5Vrms input is required. (This can be provided by the combo). A special operati.

📥 Download Datasheet

Datasheet preview – L3092

Datasheet Details

Part number L3092
Manufacturer STMicroelectronics
File Size 330.73 KB
Description SLIC KIT OPTIMIZED
Datasheet download datasheet L3092 Datasheet
Additional preview pages of the L3092 datasheet.

📁 Similar Datasheet

  • L3010 - 1A HIGH POWER LED DRIVER (UTC)
  • L3012 - 1A HIGH POWER LED DRIVER (Unisonic Technologies)
  • L3060 - 30V/500mA HIGH DIMMING RATIO LED CONSTANT CURRENT DRIVER (Unisonic Technologies)
  • L3080 - 30V/800mA INTEGRATED POWER LED DRIVER (UTC)
  • L30ESDL5V0C6-4 - ESD PROTECTION DIODE (LITE-ON)
Other Datasheets by STMicroelectronics
  • L3000 - SUBSCRIBER LINE INTERFACE KIT
  • L3000N - SLIC KIT OPTIMIZED
  • L3000S - SUBSCRIBER LINE INTERFACE KIT
  • L3030 - SUBSCRIBER LINE INTERFACE KIT
  • L3037 - SUBSCRIBER LINE INTERFACE CIRCUIT

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com L3000S L3092 SLIC KIT OPTIMIZED FOR APPLICATIONS WITH BOTH FIRST AND SECOND GENERATION COMBOS PROGRAMMABLE DC FEED RESISTANCE AND LIMITING CURRENT (25/40/60mA) LOW ON-HOOK POWER DISSIPATION (50mW typ) SIGNALLING FUNCTION (off-hook/GND-Key) QUICK OFF-HOOK DETECTION IN CVS FOR LOW DISTORTION (< 1 %) DIAL PULSE DETECTION HYBRID FUNCTION RINGING GENERATION WITH QUASI ZERO OUTPUT IMPEDANCE, ZERO CROSSING INJECTION (no ext. relay needed) AND RING TRIP DETECTION ABSOLUTELY NO NOISE INJECTED ON ADIACENT LINES DURING RINGING SEQUENCE AUTOMATIC RINGING STOP WHEN OFFHOOK IS DETECTED TEST MODE ALLOWS LINE LENGHT MEASUREMENT PARALLEL LATCHED DIGITAL INTERFACE LOW NUMBER OF EXTERNAL COMPONENTS WITH STANDARD TOLERANCE ONLY : 9 1% RESISTORS AND 5 10-20% CAPACITORS (for 600 ohm appl.
Published: |