Datasheet4U Logo Datasheet4U.com

OS81082 - Network Interface Controller

Description

The OS81082 INIC is a highly integrated Intelligent Network Interface Controller (INIC) for the 50 Mbit/s MOST Network (MOST50).

The integrated electrical physical layer (ePHY) signal conditioning circuitry offers differential I/O that directly interfaces to a passive ePHY transformer.

Features

  • Complete MOST® Network interface on a single chip.
  • Fully encapsulated.
  • Optimized for a 50 Mbps electrical physical interface (UTP) Embedded MOST Network management.
  • Network protected mode.
  • Hardware &.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OS8104 Multimedia and Control Networking Oasis SiliconSystems
OS81210 Intelligent Network Interface Controller Microchip
OS81212 Intelligent Network Interface Controller Microchip
OS81214 Intelligent Network Interface Controller Microchip
OS81216 Intelligent Network Interface Controller Microchip

Other Datasheets by SMSC (Microchip)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.net OS81082 INIC50 ePHY Intelligent Network Interface Controller for MOST Features „ „ „ „ „ „ „ „ Complete MOST® Network interface on a single chip „ Fully encapsulated „ Optimized for a 50 Mbps electrical physical interface (UTP) Embedded MOST Network management „ Network protected mode „ Hardware & application watchdog timer „ Intelligent muting Media Local Bus (MediaLB®) serial port „ Supports all MOST data types: - Synchronous data streaming - 1 kByte packet data support - FIFO-based control data support „ Eases inter-chip communication and streaming „ PCM streaming ports alternatively usable as I²S streaming port I²C control port Dedicated application reset output Operating voltages 3.3/2.5 V (3.3 V to 2.
Published: |