900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






SL

CINT1150 Datasheet Preview

CINT1150 Datasheet

150W Single Output Series ITE Power Supply

No Preview Available !

3 Years Warranty
2” x 4” x 1.3” Package
For 1U Applications
150Watts with air & 100Watts Convection Cooled
Universal Input 90-264 VAC
Approved to EN/IEC/UL60950-1 2nd Edition
Power Fail/Output good signal
Compliant (LVD, RoHS)
Optional Chassis/Cover
International Safety Agency Approvals
RoHS
CINT1150
150W Single Output Series
ITE Power Supply
Specifications
AC Input
100-240Vac +/- 10%, 47-63 Hz single phase
120-370 Vdc
Input Current
115Vac: 2A, 230Vac: 1A
Inrush Current
264Vac, cold start: will not exceed 50A
Input Fuses
F1, F2: 4A, 250VAC fuses provided on all models
Earth Leakage Current
<750µA@264Vac, 60Hz, NC
Efficiency
88% typical at 115V
Output Power 150W continuous with 200lfm airflow, 100W convection
cooled – See chart for specific voltage model ratings
Transient Response
Ripple and Noise
50% load step. i/t <0.2A/µS
Max Volt Deviation = 3%
See chart
Output Voltage
Voltage Adjustability
See chart
+/-5% from nominal
Minimum Load
Not required
Total Regulation
+/- 5%. See chart
Vibration Operating: 0.003g2/Hz, 1.5grms overall, 3 axes, 10 min/axis
Non-Operating: 0.026 g2/Hz, 5.0grms overall, 3 axes, 1 hr/axis
Dimensions
W: 2.0” x L: 4.0” x H: 1.3”. Weight: 183g
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
Turn On Time
Hold-up Time
Less than 2 sec. @115Vac (inversely proportional
to input voltage and thermistor temperature)
>12mSec at full load and 120VAC
Signals
AC Power Fail/DC OK
Overload Protection
Hiccup Mode
Short Circuit Protectionwww.DataSheet.net/
No damage to the supply
PFC Switching Frequency
65kHz typical
Overvoltage Protection OVP firing reduces output voltage to <50%
of nominal in <50mS. See chart for trip range
Isolation
Input-Output: 4000Vac
Input-Ground: 1800Vac, Output-Ground: 500Vac
Operating Temperature
-10 to +70°C
Derate output power linearly to 50% at 70°C
Storage Temperature
-40 to +85°C
Operating Altitude
Non-operating Altitude
-500 to 10,000 ft
(approved to 3,000M)
-500 to 40,000 ft
Relative Humidity
5% to 95%, non-condensing
Shock
Operating: Half-sine, 20 gpk, 10 ms, 3 axes, 6 shocks total
Non-Operating: Half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total
ITE Safety Standards
EN/CSA/UL/IEC 60950-1, 2nd Edition
Model Number Key
CINT 1 150 X 12 06 K 01
M ode l:
Input Connector:
Output Connector:
Output Voltage:
Conf igur at ion:
Output Pow er:
# of Outputs:
Product Fam ily:
"01" = Standard Model, 02 and higher indicates a m odified m odel.
"K" = 3 pin Header, Class I input
"06" = Output Connector - 6 pin Header
"12" = 12Vdc, "24" = 24Vdc, etc.
"A" = First Generation
"150" = 150 Watts Output Pow er
"1" = Single Output
"C" = ITE/Industrial, "I" = Internal, "NT" = New Technology
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
Datasheet pdf - http://www.DataSheet4U.co.kr/




SL

CINT1150 Datasheet Preview

CINT1150 Datasheet

150W Single Output Series ITE Power Supply

No Preview Available !

3 Years Warranty
CINT1150
150W Single Output Series
ITE Power Supply
Models & Output Parameters
Model Number
CINT1150A1206K01
Volts (V) Convection¹
12V 8.33A
With 200LFM air
12.50A
Ripple & Noise²
0.5%RMS, 1.2% pk-pk
Total
Regulation
±5%
OVP Threshold
14.0 ± 1.1V
CINT1150A2406K01
24V
4.17A
6.25A
0.5%RMS, 1% pk-pk
±5%
28.0 ± 2.5V
CINT1150A4806K01
48V
2.08A
3.13A
0.5%RMS, 1% pk-pk
±5%
55.0 ± 4.0V
CINT1150A5606K01
56V
1.79A
2.68A
0.5%RMS, 1% pk-pk
±5%
<59.9V
Notes: 1. Maximum output power is 95 Watts for input voltage of 90-105VAC at 50°C convection. For input voltage of 105Vac or more, the total power is
100 Watts at 50°C convection.
2. Measured with noise probe directly across output terminals, and load terminated with 0.1µF ceramic and 10µF low ESR capacitors.
EMC Compliance
Conducted Emissions
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
EN55011/22 Class B, FCC Part 15, Subpart B, Class B
EN55011/22 & FCC Part 15, Subpart B, Class A with 6dB margin
EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m. Criteria A
EN61000-4-4, 2kV/5kHz, Criteria A
EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A
EN61000-4-6, 3Vrms, Criteria A
EN61000-4-8, 3A/m, Criteria A
EN61000-4-11, loading is 70% of 100 watts with 100 Vac input.
0% Vnominal, 0.5cycle, 40% Vnominal, 5 cycles, 70% Vnominal,
25 cycles, Criteria A.
EN61000-3-2, Class A, B, C & D
EN61000-3-3, Complies (dmax<6%)www.DataSheet.net/
Signals
AC Power Fail/DC OK:
During normal operations stays high Power Fail:
DC OK:
Goes LOW with 5 mS warning before loss
of output power due to AC failure
Open collector logic signal goes and stays HIGH
100mS – 500mS after DC output reaches regulation
Mechanical Drawing and Input/Output Connections
INPUT CONNECTOR (J100):
PIN 1) AC LINE
PIN 2) EMPTY
PIN 3) AC NEUTRAL
Mating
Molex 09-50-3031,
Conn:
pins = 08-52-0072
GROUND (J101)
FG 0.187" FASTON TAB
Mating
Conn:
Molex 01-90020001
DC OUTPUT CONNECTOR (J200):
PIN 1) +Vout PIN 4) -Vout
PIN 2) +Vout PIN 5) -Vout
PIN 3) +Vout PIN 6) -Vout
Mating
Conn:
AMP 640250-6,
pins = 640252-1
SIGNAL CONNECTOR (J300):
PIN 1) PF/DCOK PIN 2) Common
Mating
Molex 1375820-2,
Conn:
pins = 1375819
Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 9/25/2012
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
Datasheet pdf - http://www.DataSheet4U.co.kr/


Part Number CINT1150
Description 150W Single Output Series ITE Power Supply
Maker SL
PDF Download

CINT1150 Datasheet PDF






Similar Datasheet

1 CINT1150 150W Single Output Series ITE Power Supply
SL





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy