ELECTRONIC
P6KE SERIES
600W Transient Voltage Suppressor
□ Features
-Plastic package has underwriters laboratory flammability classifications
-94V-0
-600W surge capability at 1ms
-Excellent clamping capability
-Low zener impedance
-Fast response time : Typically less than 1.0 PS from 0 volts to BV min
-Typical IR less than 1µA above 10V
-High temperature soldering guaranteed : 260ºC /10S/.375’’
-(9.5mm) lead length/5LBS.,(2.3kg) tension
DO-15
□ Mechanical data
-Case : Molded plastic
-Terminals : Axial leads, solderable per MIL-STD-202, method 208
-Polarity : Color band denoted cathode except bipolar
-Weight : 0.4 grams
□ Absolute maximum ratings
.140(3.6)
.104(2.6)
.034(0.9)
.028(0.7)
Symbol
PPK
PM(AV)
Ratings
600
5.0
Unit
WATTS
WATTS
Conditions
Peak power dissipation at TA=25ºC,TP = 1ms (NOTE1)
Steady state power dissipation at TL=75ºC,Lead lengths .375’’(9.5mm) (NOTE2)
IFSM
Peak forward surge current, 8.3ms single half sine-wave superimposed on rated
100 AMPS
load(Jedec method) (NOTE3)
Rth (JA)
Tj
Tstg
75
-55 to +175
-55 to +175
ºC/W
ºC
ºC
Typical Thermal Resistance Junction to Ambient
Operating temperature range
Storage temperature range
NOTE : (1) Non-repetitive current pulse, per FIG.3 and derated above TA = 25ºC per FIG.2
(2) Mounted on copper leaf area of 1.57 IN2(40mm2)
(3) 8.3ms single half sine-wave, duty cycle = 4 pulse per minutes maximum
(4)For bidirectional use C suffix for 10% tolerance, CA suffix for 5% tolerance
http:// www.sirectsemi.com
August 2007 / Rev.5
1