SGM6600
90% Efficient Synchronous
Step-Up Converter with 1.2A Switch
PACKAGE/ORDERING INFORMATION
MODEL
SGM6600
VOUT(V)
Adjustable
3.3V
5.0V
PIN-
PACKAGE
SOT-23-6
SOT-23-6
SOT-23-6
SPECIFIED
TEMPERATURE
RANGE
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
ORDERING
NUMBER
SGM6600-ADJYN6G/TR
SGM6600-3.3YN6G/TR
SGM6600-5.0YN6G/TR
PACKAGE
MARKING
S44XX
S45XX
S46XX
NOTE: Order number and package marking are defined as the follow:
PACKAGE
OPTION
Tape and Reel, 3000
Tape and Reel, 3000
Tape and Reel, 3000
ORDER NUMBER
SGM6600-X X X G / TR
Tape and Reel
Green Product
Package Type
N6 SOT-23-6
Operating Temperature Range
Y -40℃ to +85℃
Output Voltage
3.3 3.3V
5.0 5.0V
ADJ Adjustable
MARKING INFORMATION
SYY X X
Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.)
Date code - Year ("9" = 2009, "A" = 2010 …)
Chip I.D.
For example: S449A (2009, January)
ABSOLUTE MAXIMUM RATINGS
Input Supply Voltage on SW, VOUT, VCC, FB
.................................................................................-0.3V to 6V
EN Voltage..............................................-0.3V to (VOUT + 0.3V)
Operating Temperature Range...........................-40℃ to +85℃
Junction Temperature......................................................150℃
Package Thermal Resistance
SOT-23-6, θJA……………….…….…….....….………....250℃/W
Storage Temperature Range............................-65℃ to +150℃
Lead Temperature (Soldering, 10s) .................................260℃
ESD Susceptibility
HBM.................................................................................4000V
MM.....................................................................................200V
NOTE:
Stresses beyond those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device. These
are stress ratings only, and functional operation of the device at
these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended
periods may affect device reliability.
CAUTION
This integrated circuit can be damaged by ESD if you don’t pay
attention to ESD protection. SGMICRO recommends that all
integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the device
not to meet its published specifications.
SGMICRO reserves the right to make any change in circuit
design, specification or other related things if necessary without
notice at any time. Please contact SGMICRO sales office to get
the latest datasheet.
SG Micro Corp
www.sg-micro.com
2
