Datasheet4U Logo Datasheet4U.com

SGM3747 - 38V Step-Up LED Driver

General Description

The SGM3747 is a versatile constant current LED driver with a high efficiency step-up converter architecture.

The low-side power MOSFET is integrated in the device, significantly shrinking the overall PCB layout area and minimizing the total number of external components.

Key Features

  • Wide Output Range: Up to 10 Series LEDs.
  • Integrated 40V High Current Switch (1.6A Limit).
  • 2.7V to 5.5V Input Voltage Range.
  • High Efficiency PWM Converter.
  • Low 200mV Feedback Voltage.
  • 500kΩ Pull-Low Resistor on CTRL Pin.
  • 2kHz to 60kHz PWM Dimming Frequency.
  • 38V Open LED Protection.
  • 1.1MHz Switching Frequency.
  • Integrated Soft-Start Function.
  • Less than 1µA Shutdown Current.
  • Dimming Stable in 1:500 Range.
  • Simple, Small Solution Size.

📥 Download Datasheet

Datasheet Details

Part number SGM3747
Manufacturer SG Micro
File Size 375.32 KB
Description 38V Step-Up LED Driver
Datasheet download datasheet SGM3747 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SGM3780 1.5A Flash LED Driver Shengbang Microelectronics
SGM3001 SPDT Analog Switch Shengbang Microelectronics
SGM3002 SPDT Analog Switch Shengbang Microelectronics
SGM3003 SPDT Analog Switch Shengbang Microelectronics
SGM3005 SPDT Analog Switch Shengbang Microelectronics

Other Datasheets by SG Micro

Part Number Description
SGM3749 White LED Driver
SGM3710 SPDT Analog Switch
SGM3713 SPST Analog Switch
SGM3714 SPST Analog Switch
SGM3716 Negative Voltage SPDT Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SGM3747 PWM Dimming, 38V Step-Up LED Driver GENERAL DESCRIPTION The SGM3747 is a versatile constant current LED driver with a high efficiency step-up converter architecture. The low-side power MOSFET is integrated in the device, significantly shrinking the overall PCB layout area and minimizing the total number of external components. Unique technology and high 1.6A current limit allow SGM3747 to drive up to 38V output (10 LEDs in series). Alternatively, SGM3747 can deliver 260mA total current with 3 series LEDs per string. It can also maximize the current capability while achieving high conversion efficiency. The optimized 1.1MHz switching frequency results in reduced conduction loss and small external component size. Digital PWM dimming interface is integrated to adjust LED current.