SGM3134
PACKAGE/ORDERING INFORMATION
White LED Driver with
Low Dropout Current Source
MODEL
ORDER NUMBER
PACKAGE
DESCRIPTION
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
OPTION
MARKING
INFORMATION
SGM3134 SGM3134YN6G/TR
SOT-23-6L
-40°C to +85°C
Tape and Reel, 3000
S02XX
NOTE: Order number and package marking are defined as the follow:
ORDER NUMBER
MARKING INFORMATION
SGM3134 X X G / TR
S02 X X
Tape and Reel
Green Product
Month assembled ("A" = Jan. "B" = Feb. "L" = Dec.)
Year assembled ("9" = 2009, "A" = 2010 )
Package Type
N6 SOT-23-6L
Operating Temperature Range
Y -40℃ to +85℃
For example: S029A (2009 year, the 1st month)
PIN CONFIGURATION (TOP VIEW)
EN 1
6 LED1
GND 2
5 LED2
LED4 3
4 LED3
SOT-23-6L
NOTE: The location of pin 1 on the S02XX is determined by
orienting the package marking as shown.
CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends
that all integrated circuits be handled with appropriate
precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance
degradation to complete device failure. Precision integrated
circuits may be more susceptible to damage because very
small parametric changes could cause the device not to
meet its published specifications.
ABSOLUTE MAXIMUM RATINGS
VIN to GND……………….……...…….…………-0.3V to 6V
The Other Pins to GND………………………...-0.3V to 6V
Storage Temperature Range..…….……...-65℃ to +150℃
Junction Temperature………………………………...150℃
Operating Temperature Range…………… -40℃ to +85℃
Power Dissipation, PD @ TA = 25℃
SOT-23-6L ……………………………….……………..0.5W
Package Thermal Resistance
SOT-23-6L, θJA………….…………………………..250℃/W
Lead Temperature Range (Soldering 10 sec)
…………………………………..………….………….. 260℃
ESD Susceptibility
HBM………………………………………..……………4000V
MM……………………………………….…….…………400V
NOTE:
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device at
these or any other conditions above those indicated in the
operational section of this specification is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
SG Micro Limited
www.sg-micro.com
2