ICP-N50 Datasheet | ROHM

IC protector Overcurrent Protection Elements Circuit protection elements z Circuit protection elements Rohm’s circuit protectors have a very reliable current cut-off capability that protects ICs and their circuits from accidental short circuit loads. Whether operated in AC or DC circuits, these circuit protectors have a very low internal resistance in normal operation, but safely and rapidly break the circuit when the current cutoff level is exceeded. z Features 1) Cutoff is sharp and repeatable. 2) Low internal resistance and minimal voltage drop. 3) Inbustible. 4) pact. 5) Rated for continuous use. 6) Good temperature characteristics. 7) Withstands surges well. 8) UL certified (UL certification number E107856). z Application Current surge protection z Operation notes Do not use this product on the primary side of mercial power supplies. Arcs that result after cutoff may damage the molding. Surface mounting Type z ICP-S series Product name ICP-S0.5 ICP-S0.7 ICP-S1.0 ICP-S1.2 Rated Cutoff Internal resistance Rated Operating Storage current (A) characteristics Typ.(Ω) voltage (V) temperature (°C) temperature (°C) 0.5 0.7 1.0 1.2 Fig.1 Fig.2 Fig.3 Fig.4 0.150 0.084 0.061 0.048 50 - 55 to +125 - 55 to +125 Rev.A 1/5 IC protector Overcurrent Protection Elements z Cutoff characteristics CUTOFF TIME : (S) CUTOFF TIME : (S) Typ. Typ. CUTOFF TIME : (S) Typ. 0.001 0 0.001 0 0.001 0 CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) CUTOFF CURRENT : (A) Fig.1 ICP-S0.5 Fig.2 ICP-S0.7 Fig.3...