Datasheet4U Logo Datasheet4U.com

DTA144VSA - Digital transistor (built-in resistors)

Features

  • 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on / off conditions need to be set for operation, making device design easy. 4) Higher mounting densities can be achieved. !External dimensions (Units : mm) DTA144VUA (1) 0.65 0.65 0.3 (3) 1.

📥 Download Datasheet

Datasheet Details

Part number DTA144VSA
Manufacturer ROHM
File Size 57.27 KB
Description Digital transistor (built-in resistors)
Datasheet download datasheet DTA144VSA Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DTA144E PNP SILICON BIAS RESISTOR TRANSISTOR ON Semiconductor
DTA144E DIGITAL TRANSISTORS UTC
DTA144EC3 General Purpose PNP Digital Transistors CYStech Electronics
DTA144ECA PNP Digital Transistor JCST
DTA144ECA PNP Small Signal Transistor Taiwan Semiconductor

Other Datasheets by ROHM

Part Number Description
DTA144VCA PNP -100mA -50V Digital Transistor
DTA144VKA Digital transistor (built-in resistors)
DTA144VM PNP -100mA -50V Digital Transistor
DTA144VUA Digital transistor (built-in resistors)
DTA144E Digital transistors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DTA144VUA / DTA144VKA / DTA144VSA Transistors Digital transistor (built-in resistors) DTA144VUA / DTA144VKA / DTA144VSA !Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors. 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input, and parasitic effects are almost completely eliminated. 3) Only the on / off conditions need to be set for operation, making device design easy. 4) Higher mounting densities can be achieved. !External dimensions (Units : mm) DTA144VUA (1) 0.65 0.65 0.3 (3) 1.25 2.1 0.2 (2) 1.3 2.0 0.1to0.4 0to0.1 ROHM : UMT3 EIAJ : SC-70 (1) Emitter(Source) (2) Base(Gate) (3) Collector(Drain) 0.
Published: |