Datasheet4U Logo Datasheet4U.com

BU9706KS - LCD segment driver

Description

Pin No.

I Function Output pin for the liquid crystal driver.

VDD, V2, V3 or V5 is output depending on the latch content and the DF signal.

Refer to the truth table for the output level.

Features

  • 1) 40-bit shift register and 40-bit latch enable serial input - parallel output. 2) Shift register can be divided into two 20-bit sections. 3) Power supply voltage: 3.5 to 6V. 4) LCD drive voltage: 3 to 6V. 5) Can accommodates duty of 1 / 8 to 1 / 16. 6) Can be used as a driver IC for static drive by setting the liquid crystal drive voltage externally (V3 = VDD, V2 = V5 = VSS, connect DF as LCD common).
  • Block diagram O1 41 O2 40 O3 39 O38 O39 O40 4 3 2 VDD 49 V2 43 V3 44 V5.

📥 Download Datasheet

Datasheet Details

Part number BU9706KS
Manufacturer ROHM
File Size 59.09 KB
Description LCD segment driver
Datasheet download datasheet BU9706KS Datasheet

📁 Similar Datasheet

  • BU97933ACH-3BW - Dot-matrix 128 x 33 STN LCD Control Driver (ROHM Electronics)
  • BU9798GUW - Multifunction Segment Drivers (ROHM Electronics)
  • BU9798KV - Multifunction Segment Drivers (ROHM Electronics)
  • BU9-103R25BL - Common Mode Chokes (Coilcraft)
  • BU9-1320R7BL - Common Mode Chokes (Coilcraft)
  • BU9-2011R6BL - Common Mode Chokes (Coilcraft)
  • BU9-2820R5BL - Common Mode Chokes (Coilcraft)
  • BU9-6011R0BL - Common Mode Chokes (Coilcraft)
  • BU902 - NPN Transistor (INCHANGE)
  • BU902 - SILICON POWER TRANSISTOR (SavantIC)
Other Datasheets by Rohm
  • BU9706 - LCD segment driver
  • BU9716BK - Picture cell driver for STN (LCD driver)
  • BU9716BKV - Picture cell driver for STN (LCD driver)
  • BU9718KV - Picture cell driver for STN LCD driver for low voltage power supplies
  • BU9728 - LCD driver for segment-type LCDs
  • BU9728AKV - LCD driver for segment-type LCDs
  • BU9729 - Segment-type LCD driver
  • BU9729K - Segment-type LCD driver

Full PDF Text Transcription

Click to expand full text
Standard ICs LCD segment driver BU9706KS The BU9706KS is a 40-output LCD segment driver provided with a 40-bit shift register and a 40-bit latch. As the 40-bit shift register can be divided into two 20-bit sections, it can be used efficiently, based on the number of segments and the character configuration. Also, by using a number of BU9706KS drivers, it is possible to configure an LCD segment driver of more than 80 bits. As the liquid crystal drive voltage can be set externally to any value, it can be used as a driver IC for both static and dynamic drive in various types of liquid crystal display panels. Features • 1) 40-bit shift register and 40-bit latch enable serial input - parallel output. 2) Shift register can be divided into two 20-bit sections. 3) Power supply voltage: 3.
Published: |