BU1571KN Datasheet | ROHM

Description BU1571KN is AIE : Adaptive Image Enhancer (image processing technology by ROHM’s hardware). Provides unprecedented visibility under severe conditions, such as darkness or extreme backlighting. - Features 1) UXGA size (16001200) for input of image data up to 7.5 fps, SXGA size (12801024) for input of image data up to 15 fps and VGA size (640480) for input of image data up to 30 fps. 2) Input data format for YUV=4:2:2 8bit. Order of ponents may be adjusted by the register. 3) Operation modes are image enhance mode, through mode, and sleep mode. 4) Strength of image correction can be set to linear. 5) Register can be set up with a 2-line serial interface. - Extra document is prepared separately about each register setup. Please refer to the Development Scheme on page 6. No.10060ECT01 - Application Security camera, Inter with camera, Drive recorder, and Web camera etc. - Lineup matrix Parameter Supply power source voltage 1.45-1.55(VDDCore) 2.7-3.6(VDDIo) Camera Interface Supported up to Max 2M pixels. (1600×1200) Control Interface I2C BUS Output Interface 8bit YUV=4:2:2 Camera interface Interrupt output Package VQFN36 - Absolute maximum ratings (Ta=25℃) Symbol VDDIO VDD VIN Tstg PD Ratings -0.3 ~ +4.2 -0.3 ~ +2.1 -0.3 ~ VDDIO+0.3 -40 ~ +125 450 Unit V V V ℃ m W Parameter Supply power source voltage 1 Supply power source voltage 2 Input voltage Storage temperature range Power dissipation - In the case exceeding 25℃, 4.5m W should be reduced at the rating 1℃. - Remended operating range Parameter Supply power source voltage 1(IO) Supply power source voltage 2(CORE) Input voltage range Operating temperature range - Please supply power source in order of VDD→VDDIO. Symbol VDDIO VDD VIN-VDDIO Topr Ratings 2.70 ~ 3.60(Typ:3.3V) 1.45 ~ 1.55(Typ:1.50V) 0 ~ VDDIO -40 ~ +85 Unit V V V ℃ .rohm. © 2010 ROHM Co., Ltd. All rights reserved. 1/8 - Rev.C - Electric characteristics (Unless otherwise specified, VDD=1.50V,VDDIO=3.3V,GND=0.0V,Ta...