Datasheet4U Logo Datasheet4U.com

BP5293-12 - 3 terminals DC/DC Regulator

Download the BP5293-12 datasheet PDF. This datasheet also covers the BP5293-33 variant, as both devices belong to the same 3 terminals dc/dc regulator family and are provided as variant models within a single manufacturer datasheet.

Description

The BP5293-xx series is one packaged 3terminals Buck type DC/DC Converter built-in all parts of DC/DC converter.

High efficiency compared with 3 terminals regulator, and not necessary to heat sink.

It’s able to rearrange without redesign PCB, because of pin compatible.

Features

  • br>.
  • 1ch Buck DC/DC Converter.
  • SLLMTM control(Simple Light Load Mode).
  • Efficiency=70%(@IOUT=2mA).
  • Over current protection.
  • Under voltage lockout protection.
  • Soft start.
  • Not need to externals parts.
  • Small Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BP5293-33-Rohm.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number BP5293-12
Manufacturer ROHM
File Size 1.63 MB
Description 3 terminals DC/DC Regulator
Datasheet download datasheet BP5293-12 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BP5218F High PF No Flick Linear LED Driver BPS
BP5228DL Two Linear Constant Current LED Controller BPS
BP5001 Resistor Dimming Interface Controller BPS
BP5001D Resistor Dimming Interface Controller BPS
BP5005 PRESS-FIT BOSCH DIODES Shunye

Other Datasheets by ROHM

Part Number Description
BP5293-33 3 terminals DC/DC Regulator
BP5293-50 3 terminals DC/DC Regulator
BP5220 DC / DC converter
BP5220A Step-down DC/DC Converters
BP5220X DC / DC converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Smart Regulator Series 7 to 26V Input, 1.0A, Fixed Output Voltage 3 terminals DC/DC Regulator BP5293-xx Series ●General Description The BP5293-xx series is one packaged 3terminals Buck type DC/DC Converter built-in all parts of DC/DC converter. High efficiency compared with 3 terminals regulator, and not necessary to heat sink. It’s able to rearrange without redesign PCB, because of pin compatible. The built in input/output capacitors and coil is contribute to compact design. Supplied DC7V~26V output fixed voltage which is 1.8V, 3.3V, 5.0V, 12.0V line up. The output max current is 1A. High efficiency at light load with a SLLMTM. It is most suitable for use in the equipment to reduce the standby power is required.
Published: |