BH1730FVC Datasheet | ROHM

Features 1) I2C bus Interface ( f / s Mode Support, Slave address "0101001". ) 2) There are two outputs that peaks of a spectrum response are in visible light (Type0) and in infrared light (Type1). 3) Illuminance to Digital Converter 4) Very wide range and High resolution. ( 0.008 - 65535 lx ) 5) Low Current by power down function 6) 50Hz / 60Hz light noise reject-function 7) Correspond to 1.8V logic input interface 8) Light source dependency is little by calculating with Type0 and Type1. ( ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light ) 9) Interrupt function is available. 10) Adjustable measurement result for influence of optical window ( It is possible to detect min. 0.001 lx, max. 100000 lx by using this function. ) 11) Small measurement variation (+/- 15%) 12) Built in power on reset circuit. - Applications LCD TV, Mobile phone, NOTE PC, Portable game machine, Digital camera, Digital video camera, PDA, LCD display - Absolute Maximum Ratings Parameter Symbol Limits Supply Voltage VCCmax INT , SDA, DVI, SCL, Terminal Voltage VINTmax, VSDAmax, VDVImax, VSCLmax Operating Temperature Topr -40～70 Storage Temperature Tstg -40～100 SDA, INT Sink Current Imax Power Dissipation Pd 260※ ※ 70mm × 70mm × 1.6mm glass epoxy board. Derating in done at 3.47m W/℃ for operating above Ta=25℃. Units V V ℃ ℃ m A m W - Operating Conditions Parameter VCC Voltage I2C Reference Voltage Symbol Min. Typ. Max. Units Vcc 2.4 3.0 3.6 V VDVI - VCC .rohm. © 2012 ROHM Co., Ltd. All rights...