Datasheet4U Logo Datasheet4U.com

BD7683FJ-LB - Low Noise Quasi-Resonant Control DC/DC converter

Download the BD7683FJ-LB datasheet PDF. This datasheet also covers the BD7682FJ-LB variant, as both devices belong to the same low noise quasi-resonant control dc/dc converter family and are provided as variant models within a single manufacturer datasheet.

General Description

Industrial market.

all products that include an electrical outlet.

Key Features

  • Pin 8 : SOP-J8 Package (6.00mm × 4.90mm : 1.27mm pitch ).
  • Quasi-resonant type (low EMI).
  • Frequency reduction mode.
  • Low current consumption (19µA), during standby.
  • Low current consumption when no load (burst operation when light load).
  • Maximum frequency (120kHz).
  • CS Pin Leading-Edge Blanking.
  • VCC UVLO (Under Voltage Drop Out protection).
  • VCC OVP (Over Voltage Protection).
  • Per-cycle over-current protection circuit.
  • Soft start.
  • ZT tr.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BD7682FJ-LB-Rohm.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number BD7683FJ-LB
Manufacturer ROHM
File Size 2.17 MB
Description Low Noise Quasi-Resonant Control DC/DC converter
Datasheet download datasheet BD7683FJ-LB Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Low Noise Quasi-Resonant Control DC/DC converter IC for AC/DC Converter BD7682FJ-LB BD7683FJ-LB BD7684FJ-LB BD7685FJ-LB General Description This is the product guarantees long time support in the Industrial market. BD768xFJ series is a Quasi-resonant controller type DC/DC converters that provide an optimum system for all products that include an electrical outlet. Quasi-resonant operation enables soft switching and helps to keep EMI low. Design with a high degree of flexibility is achieved with switching MOSFETs and current detection resistors as external devices. The built-in brown out function monitors the input voltage as part of system optimization. The burst mode function reduces input power at low power.