Datasheet4U Logo Datasheet4U.com

BD7682FJ-LB - Low Noise Quasi-Resonant Control DC/DC converter

General Description

Industrial market.

all products that include an electrical outlet.

Key Features

  • Pin 8 : SOP-J8 Package (6.00mm × 4.90mm : 1.27mm pitch ).
  • Quasi-resonant type (low EMI).
  • Frequency reduction mode.
  • Low current consumption (19µA), during standby.
  • Low current consumption when no load (burst operation when light load).
  • Maximum frequency (120kHz).
  • CS Pin Leading-Edge Blanking.
  • VCC UVLO (Under Voltage Drop Out protection).
  • VCC OVP (Over Voltage Protection).
  • Per-cycle over-current protection circuit.
  • Soft start.
  • ZT tr.

📥 Download Datasheet

Datasheet Details

Part number BD7682FJ-LB
Manufacturer ROHM
File Size 2.17 MB
Description Low Noise Quasi-Resonant Control DC/DC converter
Datasheet download datasheet BD7682FJ-LB Datasheet

Other Datasheets by ROHM

Part Number Description
BD7683FJ-LB Low Noise Quasi-Resonant Control DC/DC converter
BD7684FJ-LB Low Noise Quasi-Resonant Control DC/DC converter
BD7685FJ-LB Low Noise Quasi-Resonant Control DC/DC converter
BD7600FV LPF-self-contained 75ohm driver
BD7602GUL Power Management IC
BD7620KS2 Video-Audio Interface
BD7628F Dual Video Amplifier
BD7628FVM Dual Video Amplifier
BD7672BG DC/DC Converter
BD7673AG DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Low Noise Quasi-Resonant Control DC/DC converter IC for AC/DC Converter BD7682FJ-LB BD7683FJ-LB BD7684FJ-LB BD7685FJ-LB General Description This is the product guarantees long time support in the Industrial market. BD768xFJ series is a Quasi-resonant controller type DC/DC converters that provide an optimum system for all products that include an electrical outlet. Quasi-resonant operation enables soft switching and helps to keep EMI low. Design with a high degree of flexibility is achieved with switching MOSFETs and current detection resistors as external devices. The built-in brown out function monitors the input voltage as part of system optimization. The burst mode function reduces input power at low power.