Datasheet4U Logo Datasheet4U.com

BD3502FVM - Nch FET Ultra LDO Controllers

This page provides the datasheet information for the BD3502FVM, a member of the BD3504FVM Nch FET Ultra LDO Controllers family.

Description

The BD3500/01/02/04FVM is an ultra-low dropout linear regulator controller for chipset that can achieve ultra-low voltage input to ultra-low voltage output.

Features

  • 1) Reduced rush current by NRCS 2) Built-in driver for external Nch h transistor 3) Adoption of MSOP8 package: 2.9 x 4.0 x 0.9 (mm) 4) Built-in timer latch short protection circuit 5) Built-in low input maloperation prevention circuit 6) Output voltage variable type 7) Built-in overheat protection circuit.

📥 Download Datasheet

Datasheet preview – BD3502FVM

Datasheet Details

Part number BD3502FVM
Manufacturer ROHM
File Size 548.05 KB
Description Nch FET Ultra LDO Controllers
Datasheet download datasheet BD3502FVM Datasheet
Additional preview pages of the BD3502FVM datasheet.

📁 Similar Datasheet

  • BD3502 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD350 - PNP Transistor (INCHANGE)
  • BD3500 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD3501 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD3503 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD3504 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD3505 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD3506 - 35A BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD35160 - 35A HIGH VOLTAGE BOSCH TYPE PRESS-FIT DIODE (Won-Top Electronics)
  • BD351N - 35 AMP BLOCK DIODES (Shunye)
Other Datasheets by Rohm

Full PDF Text Transcription

Click to expand full text
High Performance Regulators for PCs Nch FET Ultra LDO Controllers for PC Chipsets BD3504FVM,BD3500FVM,BD3501FVM,BD3502FVM No.10030EAT29 ●Description The BD3500/01/02/04FVM is an ultra-low dropout linear regulator controller for chipset that can achieve ultra-low voltage input to ultra-low voltage output. By using N-MOSFET for external power transistor, the controller can be used at ultra-low I/O voltage difference up to voltage difference generated by ON resistance. In addition, because best suited power transistor can be chosen in accord with the output current, downsizing and cost reduction of the set can be achieved. Because by reducing the I/O voltage difference, large current output is achieved and conversion loss can be reduced, switching power supply can be replaced.
Published: |