Datasheet4U Logo Datasheet4U.com

BD3005HFP - Voltage Regulator

General Description

The BD3004HFP,BD3005HFP low bias current regulator and watchdog timer

Key Features

  • a high 50 V breakdown voltage and is compatible with on-board vehicle microcontrollers. It offers an output current of 500 mA while limiting bias current to 80 µA (Typ. ). The series supports the use of ceramic capacitors as output phase compensation capacitors. The reset detection voltage can be changed by connecting a resistor to the Vs pin. （BD3004HFP）The watchdog timer can be switched on and off using the INH pin input logic. （BD3005HFP） zFeatures 1) 5 V/500 mA regulators for microcontrollers B.

📥 Download Datasheet

Datasheet Details

Part number BD3005HFP
Manufacturer ROHM
File Size 1.07 MB
Description Voltage Regulator
Datasheet download datasheet BD3005HFP Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD301 NPN Transistor INCHANGE
BD301N 30 AMP BLOCK DIODES ShunYe
BD301P 30 AMP BLOCK DIODES ShunYe
BD302 Silicon PNP Power Transistor Inchange Semiconductor Company Limited
BD302N 30 AMP BLOCK DIODES Shunye

Other Datasheets by ROHM

Part Number Description
BD3004HFP Voltage Regulator
BD3020HFP 500mA Output LDO Regulators
BD3020HFP-M 500mA Output LDO Regulators
BD3021HFP 500mA Output LDO Regulators
BD3021HFP-M 500mA Output LDO Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TECHNICAL NOTE Power Management LSI Series for Automotive Body Control Regulators with Voltage Detector and Watchdog Timer BD3004HFP,BD3005HFP zDescription The BD3004HFP,BD3005HFP low bias current regulator and watchdog timer features a high 50 V breakdown voltage and is compatible with on-board vehicle microcontrollers. It offers an output current of 500 mA while limiting bias current to 80 µA (Typ.). The series supports the use of ceramic capacitors as output phase compensation capacitors.The reset detection voltage can be changed by connecting a resistor to the Vs pin.（BD3004HFP）The watchdog timer can be switched on and off using the INH pin input logic.