Datasheet4U Logo Datasheet4U.com

BD1HC500HFN-C - 1ch High-side switch

Download the BD1HC500HFN-C datasheet PDF. This datasheet also covers the BD1HC500EFJ-C variant, as both devices belong to the same 1ch high-side switch family and are provided as variant models within a single manufacturer datasheet.

General Description

BD1HC/D500 Series is an Automotive 1ch High-Side switch.

It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection.

Fo

Key Features

  • Built-in overcurrent protection circuit.
  • Built-in Thermal Shut Down(TSD).
  • Built-in Open Load Detection circuit(When Output is OFF).
  • Possibility to control directly from CMOS logic IC.
  • Low standby current.
  • Built-in Under Voltage Lock Out circuit.
  • Built-in diagnostic(ST) output function.
  • Low On resistance of RDS(ON)=500mΩ(Typ) (VDD=12V, Ta=25°C, Io=0.25A).
  • Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip.
  • 1c.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (BD1HC500EFJ-C-Rohm.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number BD1HC500HFN-C
Manufacturer ROHM
File Size 695.97 KB
Description 1ch High-side switch
Datasheet download datasheet BD1HC500HFN-C Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD101 RECTIFIER DIODE Sinyork
BD101W RECTIFIER DIODE Sinyork
BD101WS RECTIFIER DIODE Sinyork
BD1040S SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS Pan Jit International
BD107 Silicon NPN Power Transistor Inchange Semiconductor

Other Datasheets by ROHM

Part Number Description
BD1HC500EFJ-C 1ch High-side switch
BD1HC500FVM-C 1ch High-side switch
BD1HD500EFJ-C 1ch High-side switch
BD1HD500FVM-C 1ch High-side switch
BD1HD500HFN-C 1ch High-side switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Automotive IPS series 1ch High-side switch BD1Hx500 Series Features ■ Built-in overcurrent protection circuit ■ Built-in Thermal Shut Down(TSD) ■ Built-in Open Load Detection circuit(When Output is OFF) ■ Possibility to control directly from CMOS logic IC ■ Low standby current ■ Built-in Under Voltage Lock Out circuit ■ Built-in diagnostic(ST) output function ■ Low On resistance of RDS(ON)=500mΩ(Typ) (VDD=12V, Ta=25°C, Io=0.25A) ■ Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip ■ 1ch High-side switch for the mechanical relay coil drive ■ AEC-Q100 qualified (1) (1) Grade 1 General Description BD1HC/D500 Series is an Automotive 1ch High-Side switch.