Datasheet4U Logo Datasheet4U.com

RT9538 - High Efficiency Switching Mode Battery Charger

Description

The RT9538 is a PWM switch mode battery charger controller to fast charge single or multiple Li-ion, NiMH and NiCd batteries, using constant current or constant voltage control.

Maximum current can be easily adjusted by an external resistor.

Features

  • Fast Charging for Li-ion, NiMH and NiCd Batteries.
  • Adjustable Battery Voltages from 2.5V to 25V.
  • High Efficiency : Up to 95%.
  • Charging Current Adjusted by Resistor.
  • Precision 0.5% Charging Voltage Accuracy.
  • Provide 5% Charging Current Accuracy.
  • Input Current Limit Maximizes Charging Rate.
  • 475kHz Switching Frequency.
  • Flag Indicates Li-ion Charge Completion.
  • Auto Shutdown with Adapter Removal.
  • Only 10μA Battery Drain When Idle.
  • Available.

📥 Download Datasheet

Datasheet Details

Part number RT9538
Manufacturer Richtek Technology
File Size 202.74 KB
Description High Efficiency Switching Mode Battery Charger
Datasheet download datasheet RT9538 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RT9531 High Efficiency Switching Mode Battery Charger Richtek
RT9532 Linear Single Cell Li-Ion Battery Charger Richtek
RT9503A Fully Integrated Linear Single Cell Li-Ion Battery Charger Richtek
RT9519 Linear Single Cell Li-lon Battery Charger Richtek
RT9519A Linear Single Cell Li-lon Battery Charger Richtek

Other Datasheets by Richtek Technology

Part Number Description
RT9534 High Efficiency Switching Mode Battery Charger
RT9535 High Efficiency Switching Mode Battery Charger
RT9535A High Efficiency Switching Mode Battery Charger
RT9535B High Efficiency Switching Mode Battery Charger
RT9536H Linear Single Cell Li-Ion Battery Charger IC

Full PDF Text Transcription

Click to expand full text
® RT9538 High Efficiency Switching Mode Battery Charger General Description The RT9538 is a PWM switch mode battery charger controller to fast charge single or multiple Li-ion, NiMH and NiCd batteries, using constant current or constant voltage control. Maximum current can be easily adjusted by an external resistor. The constant voltage output can support up to 30V with 0.5% accuracy. A third control loop limits the input current drawing from the adapter during charging. This allows simultaneous operation of the equipment and fast battery charging without over loading to the adapter. The RT9538 can charge batteries from 2.5V to 25V with dropout voltage as low as 2V.
Published: |