Datasheet4U Logo Datasheet4U.com

RTQ2532A - Low Dropout Linear Regulator

General Description

The RTQ2532A is a high-current (2A), low-noise (6.8VRMS), high accuracy (1% over line, load, and temperature), low-dropout linear regulator (LDO) capable of sourcing 2A with extremely low dropout (max.

125mV).

Key Features

  • Input Voltage Range : 1.1V to 6.5V.
  • Two Output Voltage Modes.
  • 0.8V to 5.5V (Set by a Resistive Divider).
  • 0.8V to 3.95V (Set via PCB Layout, No External Resistor Required).
  • Accurate Output Voltage Accuracy (1%) Over Line, Load and Temperature.
  • High PSRR : 40dB at 500kHz.
  • Noise Immunity.
  • 6.8VRMS at 0.8V Output.
  • 10VRMS at 3.3V Output.
  • Dropout Voltage : 125mV at 2A.
  • Enable Control.
  • Programmable Soft-Start Output.
  • Stable with a 22F.

📥 Download Datasheet

Datasheet Details

Part number RTQ2532A
Manufacturer Richtek
File Size 1.22 MB
Description Low Dropout Linear Regulator
Datasheet download datasheet RTQ2532A Datasheet

Other Datasheets by Richtek

Part Number Description
RTQ2532E Low-Dropout Linear Regulator
RTQ2532N Ultra Low Dropout Linear Regulator
RTQ2532W Ultra Low Dropout Linear Regulator
RTQ2531A Low Noise Low Dropout Regulator
RTQ2533E Low-Dropout Linear Regulator
RTQ2533W Low Dropout Linear Regulator
RTQ2536-QA DDR Termination Regulator
RTQ2537 Ultra Low Dropout Linear Regulator
RTQ2537E Low-Dropout Linear Regulator
RTQ2538H Ultra-Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RTQ2532A 2A, 6.5V, Low Noise, Low Dropout Linear Regulator 1 General Description The RTQ2532A is a high-current (2A), low-noise (6.8VRMS), high accuracy (1% over line, load, and temperature), low-dropout linear regulator (LDO) capable of sourcing 2A with extremely low dropout (max. 125mV). The device output voltage is pinselectable (up to 3.95V) using a PCB layout without the need of external resistors, thus reducing overall component count. Designers can achieve higher output voltage with the use of external resistor divider. The device supports single input supply voltage as low to 1.1V that makes it easy to use.