Datasheet4U Logo Datasheet4U.com

RT6361 - Asynchronous Step-Down Converter

Description

The RT6361 is a 1.5A, high-efficiency, peak current mode control asynchronous step-down converter.

The device operates with input voltages from 4V to 60V.

The device can program the output voltage between 0.8V to VIN.

Features

  • Wide Input Voltage Range  4.5V to 60V  4V to 60V (Soft-start is finished).
  • Wide Output Voltage Range : 0.8V to VIN.
  • 0.8V ±1.5% Reference Accuracy.
  • Peak Current Mode Control.
  • Integrated 160mΩ High-Side MOSFET.
  • Low Quiescent Current : 90μA.
  • Low Shutdown Current : 1.3μA.
  • Adjustable Switching : 100kHz to 2.5MHz.
  • Synchronizable Switching : 300kHz to 2.2MHz.
  • Power Saving Mode (PSM) at Light Load.
  • Low Dropout at Light Loads with Integrated Boot.

📥 Download Datasheet

Datasheet preview – RT6361

Datasheet Details

Part number RT6361
Manufacturer Richtek
File Size 658.42 KB
Description Asynchronous Step-Down Converter
Datasheet download datasheet RT6361 Datasheet
Additional preview pages of the RT6361 datasheet.

📁 Similar Datasheet

  • RT600 - Dual-core microcontroller (NXP)
  • RT6105X - NPN SILICON RF POWER TRANSISTOR (Advanced Semiconductor)
  • RT6200G - 600mA Synchronous Step-down DCDC Converter (tokmas)
  • RT6206 - 300mA LDO LINEAR VOLTAGE/REGULATORS (Racetek)
  • RT6588 - REMOTE CONTROL ENCODER AND DECODER PAIRED (Rato)
Other Datasheets by Richtek
  • RT6360 - Asynchronous Step-Down Converter
  • RT6362 - Asynchronous Step-Down Converter
  • RT6363 - Asynchronous Step-Down Converter
  • RT6365 - 5A Asynchronous Step-Down Converter
  • RT6300A - Complete LPDDR5/5X Memory Power Solution
  • RT6301A - Complete LPDDR5/5X Memory Power Solution
  • RT6310 - 23V Synchronous Step-Down Converter
  • RT6316B - 23V Synchronous Step-Down Converter

Full PDF Text Transcription

Click to expand full text
® RT6361 60VIN, 1.5A, Asynchronous Step-Down Converter with Low Quiescent Current General Description The RT6361 is a 1.5A, high-efficiency, peak current mode control asynchronous step-down converter. The device operates with input voltages from 4V to 60V. The device can program the output voltage between 0.8V to VIN. The low quiescent current design with the integrated low RDS(ON) of high-side MOSFET achieves high efficiency over the wide load range. The peak current mode control with simple external compensation allows the use of small inductors and results in fast transient response and good loop stability. The wide switching frequency of 100kHz to 2500kHz allows for efficiency and size optimization when selecting the output filter components.
Published: |