Datasheet4U Logo Datasheet4U.com

RT5014 - 7+6 Channels Power Management

General Description

The RT5014 is a complete power supply solution for digital still cameras and other hand held devices.

Key Features

  • z Input Voltage 1.8V to 5.5V z 7-CH DC/DC Converters z 6-CH Linear Regulator ` One HVLDO, 4 LVLDO (for Memory Card, PLL, AFE, SYS), One RTC-LDO z All Power Switches Integrated z All Step-Up Converters with Load Disconnect Function z All DC/DC Converters with Internal Frequency Compensation z All DC/DC Converters with Pulse Skip Mode Function z Fixed 2MHz Operating Frequency for CH1/2/3/4 (Motor, SYS, CORE, MEM) z Fixed 1MHz Operating Frequency for CH5/6/7 (CCD+, CCD.
  • , WLED) z CH2 Sync. S.

📥 Download Datasheet

Datasheet Details

Part number RT5014
Manufacturer Richtek
File Size 934.64 KB
Description 7+6 Channels Power Management
Datasheet download datasheet RT5014 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RT5000H Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5000L Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5000S Welding Torch for Robot Coaxial Power Cable for Robot DAIHEN
RT5350 Mini PCI Express Wireless-Module Ralink
RT5370 highly integrated MAC/BBP and 2.4-GHz RF/PA/LNA Ralink

Other Datasheets by Richtek

Part Number Description
RT5016C Programmable Multi-Channel PMU
RT5002 7 + 1 Channel DC/DC PMU
RT5002C 7 + 1 Channel DC/DC PMU
RT5006 Single Output LNB Power Supply Controller
RT5007 Single Output LNB Power Supply Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® RT5014 7+6 Channels Power Management IC for DSC General Description The RT5014 is a complete power supply solution for digital still cameras and other hand held devices. The RT5014 is a multi-channel DC/DC power management unit including one synchronous step-up DC/DC converter with load disconnect (CH1), one selectable synchronous step-up/ step-down DC/DC converter (CH2), two synchronous stepdown DC/DC converters (CH3/4), one synchronous high voltage step-up DC/DC converter (CH5), one asynchronous inverting DC/DC converter (CH6) and one WLED driver in synchronous high voltage step-up mode or current regulator mode (CH7).