Preliminary Data Sheet
2.0 A OUTPUT CURRENT, HIGH CMR, IGBT GATE DRIVE, 6-PIN SDIP PHOTOCOUPLER
Sep 27, 2013
The PS9308L and PS9308L2 are optical coupled isolators containing a GaAlAs LED on the input side and a photo
diode, a signal processing circuit and a power output transistor on the output side on one chip.
The PS9308L and PS9308L2 are in 6-pin plastic SDIP (Shrink Dual In-line Package). The PS9308L2 has 8 mm
creepage distance. The mount area of 6-pin plastic SDIP is half size of 8-pin DIP.
The PS9308L and PS9308L2 are designed specifically for high common mode transient immunity (CMR) and high
switching speed. It is suitable for driving IGBTs and MOS FETs.
The PS9308L is lead bending type (Gull-wing) for surface mounting.
The PS9308L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
Long creepage distance (8 mm MIN.: PS9308L2)
Half size of 8-pin DIP
Peak output current (2.0 A MAX., 1.0 A MIN.)
High speed switching (tPLH, tPHL = 0.25 μs MAX.)
UVLO (Under Voltage Lock Out) protection with hysteresis
High common mode transient immunity (CMH, CML = ±25 kV/μs MIN.)
Embossed tape product : PS9308L-E3, PS9308L2-E3 : 2 000 pcs/reel
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• SEMKO approved (EN 60065, EN 60950)
• DIN EN60747-5-5 (VDE0884-5) approved (Option)
• IGBT, Power MOS FET Gate Driver
• Industrial inverter
• IH (Induction Heating)
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
Sep 27, 2013
Page 1 of 20