Datasheet4U Logo Datasheet4U.com

MK3754 - VCXO

Description

The MK3754D and MK3754B are drop-in replacements for the MK3754S device.

Compared to these earlier devices the MK3754D and MK3754B offer a wider operating frequency range and improved power supply noise rejection.

Features

  • MK3754D and MK3754B are drop-in upgrades to the earlier MK3754S device.
  • Packaged in 8-pin SOIC.
  • Available in Pb (lead) free package.
  • Operating voltage of 3.3 V.
  • Uses an inexpensive 13.500 MHz external crystal.
  • On-chip VCXO (patented) with pull range of 200 ppm (minimum).
  • VCXO turning voltage of 0 to 3.3V.
  • 12 mA output drive capability at TTL levels.
  • Advanced, low power, sub-micron CMOS process MK3754D is Recommende.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MK3754 Low Cost 54 MHz 3.3 Volt VCXO Integrated Circuit Systems
MK3711 LOW COST 8 - 16 MHZ 3.3 VOLT VCXO Integrated Circuit Systems
MK3713 Low Cost 3.3 Volt VCXO Integrated Circuit Systems
MK3720 27 MHz and 54 MHz 3.3 Volt VCXO Integrated Circuit Systems
MK3721 Low Cost 3.3 Volt VCXO Integrated Circuit Systems

Other Datasheets by Renesas

Part Number Description
MK3721 LOW COST 16.2 TO 28MHZ 3.3 VOLT VCXO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LOW COST 54 MHZ 3.3 VOLT VCXO DATASHEET MK3754 Description The MK3754D and MK3754B are drop-in replacements for the MK3754S device. Compared to these earlier devices the MK3754D and MK3754B offer a wider operating frequency range and improved power supply noise rejection. The MK3754 is ICS’ lowest cost, low jitter, high performance 3.3 Volt VCXO and PLL clock synthesizer designed to replace expensive 54 MHz VCXOs. The on-chip Voltage Controlled Crystal Oscillator accepts a 0 to 3.3 V input voltage to vary the output clocks by ±100 ppm. Using ICS’ patented VCXO and analog/digital Phase-Locked Loop (PLL) techniques, the device uses an inexpensive external 13.5 MHz pullable crystal input to produce a 54 MHz output clock.
Published: |