Datasheet4U Logo Datasheet4U.com

ISL89367 - MOSFET Driver

General Description

1, 8 VREF+ VREF+ and VREF- are the reference voltages for VREF- the IN1A, IN1B, IN2A, and IN2B logic inputs.

VREF+ is normally connected to the positive bias voltage of the input logic.

VREF- is normally connected to the ground reference of the input logic.

Key Features

  • 2 outputs with 6A peak drive currents (sink and source) with output voltage range of 4.5V to 16V.
  • Typical ON-resistance.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL89160 Power MOSFET Drivers Intersil
ISL89161 Power MOSFET Drivers Intersil
ISL89162 Power MOSFET Drivers Intersil
ISL89166 High Speed Dual Channel 6A - Power MOSFET Driver Intersil
ISL89167 High Speed Dual Channel 6A - Power MOSFET Driver Intersil

Other Datasheets by Renesas

Part Number Description
ISL89163 Power MOSFET Driver
ISL89164 Power MOSFET Driver
ISL89165 Power MOSFET Driver
ISL89400 High Frequency Half-Bridge Drivers
ISL89401 High Frequency Half-Bridge Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISL89367 NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc High Speed, Dual Channel, 6A, MOSFET Driver With Programmable Rising and Falling Edge Delay Timers DATASHEET FN7727 Rev 1.00 October 8, 2012 The ISL89367 is a high-speed, 6A, 2 channel MOSFET driver optimized for synchronous rectifier applications. Internal timers can be programmed with resistors to delay the rising and/or falling edges of the outputs. Logically ANDed dual inputs are also provided. One input is for the PWM signal and the second can be used as an enable. A third control input is used to optionally invert the logical polarity of the driver outputs.