ISL8200MM
NOT RECOMMENDED FOR NEW DESIGNS
RECOMMENDED REPLACEMENT PART
ISL8200AM
Complete Current Share 10A DC/DC Power Module
DATASHEET
FN7690
Rev 2.00
Mar 15, 2013
The ISL8200MMREP is a simple and easy to use high power,
current-sharing DC/DC power module for
Datacom/Telecom/FPGA power hungry applications. All that is
needed is the ISL8200MMREP, a few passive components and
one VOUT setting resistor to have a complete 10A design ready
for market.
The ease of use virtually eliminates the design and
manufacturing risks while dramatically improving time to
market.
Need more output current? Just simply parallel up to six
ISL8200MMREP modules to scale up to a 60A solution (see
Figure 6 on page 10).
The simplicity of the ISL8200MMREP is in its “Off The Shelf”,
unassisted implementation. Patented current sharing in multi-
phase operation greatly reduces ripple currents, BOM cost and
complexity. For example, parallel 2 for 20A and up to 6 for
60A. The output voltage can be precisely regulated to as low
as 0.6V with ±1% output voltage regulation over line, load, and
temperature variations.
The ISL8200MMREP’s thermally enhanced, compact QFN
package, operates at full load and over-temperature, without
requiring forced air cooling. It's so thin it can even fit on the
back side of the PCB. Easy access to all pins with few external
components, reduces the PCB design to a component layer
and a simple ground layer.
Features
• Specifications per DLA VID V62/10608
• Full mil-temp electrical performance from -55°C to +125°C
• Full traceability through assembly and test by date/trace
code assignment
• Enhanced process change notification
• Enhanced obsolescence management
• Complete switch mode power supply in one package
• Patented current share architecture reduces layout sensitivity
when modules are paralleled
• Programmable phase shift (1, 2, 3, 4, and 6 phase)
• Extremely low profile (2.2mm height)
• Input voltage range +3.0V to +20V at 10A, current share up to
60A
• A Single resistor sets VOUT from +0.6V to +6V
• Output overvoltage, overcurrent and over-temperature, built-in
protection and undervoltage indication
Applications
• Servers, telecom and datacom applications
• Industrial and medical equipment
• Point of load regulation
Related Literature
• iSim Model - (See Product Information page ISL8200MM)
Complete Functional Schematic ISL8200MMREP Package
2.2mm
FIGURE 1. COMPLETE 10A DESIGN, JUST SELECT RSET FOR THE
DESIRED VOUT
15mm
15mm
FIGURE 2. THE 2.2mm HEIGHT IS IDEAL FOR THE BACKSIDE OF
PCBS WHEN SPACE AND HEIGHT IS A PREMIUM
FN7690 Rev 2.00
Mar 15, 2013
Page 1 of 24