Datasheet4U Logo Datasheet4U.com

ICS601-02 - LOW PHASE NOISE CLOCK MULTIPLIER

Description

The ICS601-02 is a low cost, low phase noise, high performance clock synthesizer for any application that requires low phase noise and low jitter.

The ICS601 is IDT’s lowest phase noise multiplier.

Features

  • Packaged in 16-pin SOIC (Pb free).
  • Uses fundamental 10 - 27 MHz crystal or clock.
  • Patented PLL with the lowest phase noise.
  • Output clocks up to 170 MHz at 3.3 V.
  • Output Enable function tri-states outptus.
  • Low phase noise: -132 dBc/Hz at 10 kHz.
  • Low jitter - 18 ps one sigma.
  • Full swing CMOS outputs with 25 mA drive capability at TTL levels.
  • Advanced, low power, sub-micron CMOS process.
  • Industrial temperatur.

📥 Download Datasheet

Datasheet Details

Part number ICS601-02
Manufacturer Renesas
File Size 322.02 KB
Description LOW PHASE NOISE CLOCK MULTIPLIER
Datasheet download datasheet ICS601-02 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICS650-01B System Peripheral Clock Source Integrated Circuit Systems
ICS650-05 HDTV Clock Synthesizer Integrated Circuit Systems
ICS650-07B Broadcom Clock Source Integrated Circuit Systems
ICS650-07C Networking Clock Source Integrated Circuit Systems
ICS650-11 NETWORKING CLOCK SYNTHESIZER IDT

Other Datasheets by Renesas

Part Number Description
ICS601-01 LOW PHASE NOISE CLOCK MULTIPLIER
ICS601-21 LOW PHASE NOISE CLOCK MULTIPLIER
ICS621 LOW SKEW 1 TO 4 CLOCK BUFFER
ICS650-01 SYSTEM PERIPHERAL CLOCK SOURCE
ICS650-07C NETWORKING CLOCK SOURCE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LOW PHASE NOISE CLOCK MULTIPLIER DATASHEET ICS601-02 Description The ICS601-02 is a low cost, low phase noise, high performance clock synthesizer for any application that requires low phase noise and low jitter. The ICS601 is IDT’s lowest phase noise multiplier. Using IDT’s patented analog and digital Phase Locked Loop (PLL) techniques, the chip accepts a 10–27 MHz crystal or clock input, and produces output clocks up to 170 MHz at 3.3 V. A separate supply pin is provided so that the output can be 2.5 V. This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined nor guaranteed. For applications which require defined input to output timing, use the ICS670-01.
Published: |