Datasheet4U Logo Datasheet4U.com

ICS511 - PLL CLOCK MULTIPLIER

Description

The ICS511 LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input.

The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems.

Features

  • Packaged as 8-pin SOIC or die.
  • Pb (lead) free package.
  • Upgrade of popular ICS501 with: - changed multiplier table - faster operating frequencies - output duty cycle at VDD/2.
  • Zero ppm multiplication error.
  • Input crystal frequency of 5 - 27 MHz.
  • Input clock frequency of 2 - 50 MHz.
  • Output clock frequencies up to 200 MHz.
  • Extremely low jitter of 25 ps (one sigma).
  • Compatible with all popular CPUs.
  • Duty cycle.

📥 Download Datasheet

Datasheet preview – ICS511

Datasheet Details

Part number ICS511
Manufacturer Renesas Electronics
File Size 406.47 KB
Description PLL CLOCK MULTIPLIER
Datasheet download datasheet ICS511 Datasheet
Additional preview pages of the ICS511 datasheet.

📁 Similar Datasheet

  • ICS511 - PLL CLOCK MULTIPLIER (IDT)
  • ICS512 - PLL CLOCK MULTIPLIER (IDT)
  • ICS512 - PLL Clock Multiplier (Integrated Circuit Systems)
  • ICS513 - PLL Clock Generator (Integrated Circuit Systems)
  • ICS514 - PLL CLOCK GENERATOR (IDT)
  • ICS514 - PLL Clock Generator (Integrated Circuit Systems)
  • ICS501 - PLL CLOCK MULTIPLIER (IDT)
  • ICS501 - LOCO PLL Clock Multiplier (Integrated Circuit Systems)
  • ICS501A - PLL CLOCK MULTIPLIER (IDT)
  • ICS501B - LOCO PLL Clock Multiplier (Integrated Circuit Systems)
Other Datasheets by Renesas
  • ICS501 - PLL CLOCK MULTIPLIER
  • ICS501A - PLL CLOCK MULTIPLIER
  • ICS501B - PLL CLOCK MULTIPLIER
  • ICS502 - CLOCK MULTIPLIER
  • ICS524 - LOW SKEW 1 TO 4 CLOCK BUFFER
  • ICS527-02 - CLOCK SLICER USER CONFIGURABLE PECL INPUT ZERO DELAY BUFFER
  • ICS527-03 - CLOCK SLICER USER CONFIGURABLE PECL OUTPUT ZDB
  • ICS527-04 - Clock Slicer

Full PDF Text Transcription

Click to expand full text
LOCO™ PLL CLOCK MULTIPLIER DATASHEET ICS511 Description The ICS511 LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 200 MHz. Stored in the chip’s ROM is the ability to generate nine different multiplication factors, allowing one chip to output many common frequencies (see table on page 2). The device also has an output enable pin which tri-states the clock output when the OE pin is taken low. This product is intended for clock generation.
Published: |