ICS502 Datasheet | Renesas

Description The ICS502 LOCOTM is the most cost effective way to generate a high-quality, high-frequency clock output and a reference from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip’s ROM is the ability to generate six different multiplication factors, allowing one chip to output many mon frequencies (see table on page 2). This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined or guaranteed. For applications which require defined input to output skew, use the ICS570B. Features - Packaged as 8-pin SOIC or die - Pb (lead) free package - IDT’s lowest cost PLL clock - Zero ppm multiplication error - Easy to cascade with ICS5xx series - Input crystal frequency of 5 - 27 MHz - Input clock frequency of 2 - 50 MHz - Output clock frequencies up to 190 MHz - Low jitter - 50 ps one sigma - patible with all popular CPUs - Duty cycle of 45/55 up to 160 MHz - Operating voltages of 3.0 to 5.5 V - 25 m A drive capability at TTL levels - Industrial temperature version available - Advanced, low-power CMOS process Block Diagram S1, S0 X1/ICLK Crystal or Clock input X2 Crystal OScillator PLL Clock M u ltip lie r Circuitry and CLK REF IDT™ / ICS™ LOCO™ PLL CLOCK MULTIPLIER REV M 051310 ICS502 LOCO™ PLL CLOCK MULTIPLIER Pin Assignment X1/ICLK 1 VDD 2 GND 3 REF 4 8 X2 7 S1 6 S0 5...