Datasheet4U Logo Datasheet4U.com

ICL7665S - CMOS Micropower Over/Under Voltage Detector

Features

  • Guaranteed 10µA maximum quiescent current over-temperature.
  • Guaranteed wider operating voltage range over entire operating temperature range.
  • 2% threshold accuracy (ICL7665SA).
  • Dual comparator with precision internal reference.
  • 100ppm/°C temperature coefficient of threshold voltage.
  • 100% tested at 2V.
  • Output current sinking ability.
  • . . . Up to 20mA.
  • Individually programmable upper and lower trip voltages a.

📥 Download Datasheet

Datasheet Details

Part number ICL7665S
Manufacturer Renesas
File Size 684.41 KB
Description CMOS Micropower Over/Under Voltage Detector
Datasheet download datasheet ICL7665S Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ICL7665 Microprocessor Voltage Monitor Maxim Integrated Products
ICL7660 Switched-Capacitor Voltage Converters Maxim
ICL7662 CMOS VOLTAGE CONVERTERS Maxim Integrated Products
ICL7663 Programmable Positive Voltage Regulator Maxim Integrated Products
ICL7664 Programmerble Negative Voltage Regulator Maxim Integrated Products

Other Datasheets by Renesas

Part Number Description
ICL7660 CMOS Voltage Converter
ICL7660A Super Voltage Converters
ICL7660S Super Voltage Converters
ICL7662 CMOS Voltage Converter
ICL7663S CMOS Programmable Micropower Positive Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICL7665S CMOS Micropower Over/Under Voltage Detector The ICL7665S super CMOS micropower Over/Under voltage detector contains two low power, individually programmable voltage detectors on a single CMOS chip. Requiring typically 3A for operation, the device is intended for battery-operated systems and instruments which require high or low voltage warnings, settable trip points, or fault monitoring and correction. The trip points and hysteresis of the two voltage detectors are individually programmed via external resistors. An internal bandgap type reference provides an accurate threshold voltage while operating from any supply in the 1.6V to 16V range. The ICL7665S, super programmable Over/Under voltage detector is a direct replacement for the industry standard.
Published: |