Datasheet4U Logo Datasheet4U.com

HD74LV163A - Synchronous 4-bit Binary Counter

Description

The HD74LV163A is 4-bit binary counters.

All flip flops are clocked simultaneously on the low to high to transition (positive edge) of the clock input waveform.

These counters may be preset using the load input.

Features

  • VCC = 2.0 V to 5.5 V operation.
  • All inputs VIH (Max. ) = 5.5 V (@VCC = 0 V to 5.5 V).
  • All outputs VO (Max. ) = 5.5 V (@VCC = 0 V).
  • T.

📥 Download Datasheet

Datasheet Details

Part number HD74LV163A
Manufacturer Renesas
File Size 101.61 KB
Description Synchronous 4-bit Binary Counter
Datasheet download datasheet HD74LV163A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HD74LV163A Synchronous 4-bit Binary Counter (Synchronous Clear) Hitachi Semiconductor
HD74LV161A Synchronous 4-bit Binary Counter (Direct Clear) Hitachi Semiconductor
HD74LV164A 8-bit Parallel-out Serial-in Shift Register Hitachi Semiconductor
HD74LV165A Parallel-Load 8-bit Shift Register Hitachi Semiconductor
HD74LV166A Parallel-Load 8-bit Shift Register Hitachi Semiconductor

Other Datasheets by Renesas

Part Number Description
HD74LV161A Synchronous 4-bit Binary Counter
HD74LV166A Parallel-Load 8-bit Shift Register
HD74LV10A Triple 3-input Positive NAND Gates
HD74LV11A Triple 3-input Positive AND Gates
HD74LV123A Dual Retriggerable Monostable Multivibrators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
HD74LV163A Synchronous 4-bit Binary Counter (Synchronous Clear) REJ03D0320–0500Z (Previous ADE-205-265C (Z)) Rev.5.00 Jun. 04, 2004 Description The HD74LV163A is 4-bit binary counters. All flip flops are clocked simultaneously on the low to high to transition (positive edge) of the clock input waveform. These counters may be preset using the load input. Presetting of all four flip flops is synchronous to the rising edge of clock. When load is held low counting is disabled and the data on the A, B, C and D inputs is loaded into the counter on the rising edge clock. If the load input is taken high before the positive edge of clock, the count operation will be unaffected. Low-voltage and high-speed operation is suitable for the battery-powered products (e.g.
Published: |