EL9110 Datasheet - Renesas

EL9110 Differential Receiver/Equalizer

CONDITIONS MIN MAX (Note 1) TYP (Note 1) UNIT AC PERFORMANCE BW Bandwidth (See Figure 1) 150 MHz SR Slew Rate THD Total Harmonic Distortion DC PERFORMANCE VIN = -1V to +1V, VG = 0.35, VC = 0, RL = 75 + 75 10MHz 1VP-P out, VG = 0.35V, X2 gain, VC = 0 1.5 -50 V/ns dBc VOS Offset Voltag.

EL9110 Differential Receiver/Equalizer The EL9110 is a single channel differential receiver and equalizer. It contains a high speed differential receiver with 5 programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin. The EL9110 also contains a three-statable output, enabling multiple devices to be connected in parallel and used in a multiplexing application. The gain can be adjusted up or down b.

EL9110 Features

* 150MHz -3dB bandwidth

* CAT-5 compensation - 75MHz @ 1000ft - 125MHz @ 500ft

* 33mA supply current

* Differential input range 3.2V

* Common mode input range ±4.5V

* ±5V supply

* Output to within 1.5V of supplies

* Available in 16 Ld Q

EL9110 Datasheet (566.53 KB)