P4KE220 Datasheet | Rectron

FEATURES - Plastic package has underwriters laboratory - Glass passivated chip construction - 400 watt surage capability at 1ms - Excellent clamping capability - Low zener impedance - Fast response time TVS P4KE SERIES DO-41 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load, For capacitive load, derate current by 20%. 1.0 (25.4) MIN. .034 (0.9) DIA. .028 (0.7) .205 (5.2) .166 (4.2) 1.0 (25.4) MIN. .107 (2.7) DIA. .080 (2.0) Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types P4KE6.8 thru P4KE440 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25o C unless otherwise noted) RATINGS Peak Power Dissipation at TA = 25o C, TP = 1m S ( Note 1 ) Steady State Power Dissipation at TL = 75o C lead lengths, .375” ( 9.5 mm ) ( Note 2 ) SYMBOL PPPM PM(AV) VALUE Minimum 400 Peak Forward Surge Current, 8.3ms single half sine wavesuperimposed on rated load( JEDEC METHOD ) ( Note S 2 ) Maximum Instantaneous Forward Current at 25A for unidirectional only ( Note 3 ) IFSM VF 40 3.5/6.5 Operating and Storage Temperature Range TJ, TSTG -55 to + 150 Typical Current Squarad Time I2t 6.64 NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25o C per Fig.2. 2. Mounted on 1.6 X 1.6” ( 40 X 40mm ) per Fig. 5 3. VF = 3.0V max. for devices of V(BR) < 220V and VF = 6.5 Volts max. for devices of V(BR) > 220V. 4. “Fully ROHS pliant”, “100% Sn plating (Pb-free)”. UNITS Watts Watts Amps Volts 0C A2/Sec 2016-09...