Datasheet4U Logo Datasheet4U.com

BV1LB300FJ-C - 1ch Low-Side Switch

General Description

The BV1LB300FJ-C is an automotive 1ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.

Key Features

  • Built-in overcurrent limiting circuit(OCP).
  • Built-in thermal shutdown circuit(TSD).
  • Built-in active clamp circuit.
  • Direct control enabled from CMOS logic IC, etc.
  • On-state resistance RON=300mΩ(Typ) (when VIN5V, ID=0.5A, Tj25C).
  • Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip.
  • AEC-Q100 Qualified (Note1) (Note 1) Grade1 General.

📥 Download Datasheet

Datasheet Details

Part number BV1LB300FJ-C
Manufacturer ROHM
File Size 0.98 MB
Description 1ch Low-Side Switch
Datasheet download datasheet BV1LB300FJ-C Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Automotive IPD Series 1ch Low Side Switch IC BV1LB300FJ-C Features ■ Built-in overcurrent limiting circuit(OCP) ■ Built-in thermal shutdown circuit(TSD) ■ Built-in active clamp circuit ■ Direct control enabled from CMOS logic IC, etc. ■ On-state resistance RON=300mΩ(Typ) (when VIN5V, ID=0.5A, Tj25C) ■ Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip ■ AEC-Q100 Qualified (Note1) (Note 1) Grade1 General Description The BV1LB300FJ-C is an automotive 1ch low side switch IC, which has built-in overcurrent limiting circuit, thermal shutdown circuit, and overvoltage (active clamp) protection circuit.