Datasheet4U Logo Datasheet4U.com

BM92T10MWV - USB Type-C Power Delivery Controller

General Description

BM92T10 is a full function Type-C USB-PD controller that supports USB Power Delivery using base-band communication.

specification rev1.1 and USB Power Delivery specification rev2.0.

Key Features

  • USB Type-C Spec 1.1 compatible.
  • USB PD Spec 2.0 compatible (BMC-PHY).
  • Two channel power path control using N-channel MOSFET drivers with back flow prevention.
  • Type C cable orientation detection.
  • Built-in VCONN Switch and VCONN controller.
  • Direct VBUS powered operation.
  • Supports Deep-Sleep-Mode (PC.

📥 Download Datasheet

Datasheet Details

Part number BM92T10MWV
Manufacturer ROHM
File Size 870.69 KB
Description USB Type-C Power Delivery Controller
Datasheet download datasheet BM92T10MWV Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BM9209 300mA CMOS LDO BOOKLY
BM9230 600mA CMOS LDO Bookly
BM90 Bluetooth 3.0 Multi-Speaker Stereo Audio Module ISSC
BM9162 450mA Low Dropout Positive Voltage Regulator BOOKLY
BM9164 1A BiCMOS LDO BOOKLY

Other Datasheets by ROHM

Part Number Description
BM92T20MWV USB Type-C Power Delivery Controller
BM92T30MWV USB Type-C Power Delivery Controller
BM92T50MWV USB Type-C Power Delivery Controller
BM92A11MWV-Z USB Type-C Power Delivery Controller
BM92A12MWV-Z USB Type-C Power Delivery Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Type-C USB Power Delivery Controller BM92T10MWV General Description BM92T10 is a full function Type-C USB-PD controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C specification rev1.1 and USB Power Delivery specification rev2.0. BM92T10 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP’, SOP’’ and SOP’’’ signaling, allowing it to communicate with cable marker ICs, support alternate modes and protocol adapters. Features  USB Type-C Spec 1.1 compatible  USB PD Spec 2.