BM2P163W Datasheet | ROHM

AC/DC Convertor IC PWM type DC/DC converter IC Integrated Switching MOSFET for non-Isolated type BM2P161W/BM2P163W General The PWM type DC/DC converter series for AC/DC provides an optimum system for all products that include an electrical outlet. It enables simpler design of a high effective converter specializing in non-isolated devices. This series has a built-in HV starter circuit that tolerates 650V, and it contributes to low power consumption. With a current detection resistor as internal device, it can be designed as small power supply. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The switching frequency is fixed to 65 k Hz. At light load, the switching frequency is reduced and high efficiency is achieved. A frequency hopping function is also on chip, and it contributes to low EMI. In addition, a built-in super junction MOSFET which tolerates 650V makes the design easy. Features - PWM frequency: 65k Hz - PWM current mode method - Frequency hopping function - Burst operation at light load - Frequency reduction function - Built-in 650V start circuit - Built-in 650V switching MOSFET - VCC pin under voltage protection - VCC pin over voltage protection - Over current limiter function per cycle - Soft start function Basic Specification - Power Supply Voltage Operation Range: VCC: 8.00V to 18.16V DRAIN: to 650V - Normal Operation Current BM2P161W 1.50m A (Typ.) BM2P163W 1.20m A (Typ.) - Burst Operation Current 0.35m A(Typ.) - Oscillation Frequency - Operation Temperature Range 65k Hz(Typ.) - 40 o C to +105 o...