Datasheet4U Logo Datasheet4U.com

BM2P092F - DC/DC Converter

This page provides the datasheet information for the BM2P092F, a member of the BM2P052F DC/DC Converter family.

Features

  • PWM frequency : 65kHz.
  • PWM current mode method.
  • Burst operation when load is light.
  • Frequency reduction function.
  • Built-in 650V start circuit.
  • Built-in 650V switching MOSFET.
  • VCC pin under voltage protection.
  • VCC pin overvoltage protection.
  • SOURCE pin Open protection.
  • SOURCE pin Short protection.
  • SOURCE pin Leading-Edge-Blanking function.
  • Per-cycle over current protection circuit.
  • Soft start.
  • Secondary Over current protectio.

📥 Download Datasheet

Datasheet preview – BM2P092F

Datasheet Details

Part number BM2P092F
Manufacturer ROHM
File Size 0.97 MB
Description DC/DC Converter
Datasheet download datasheet BM2P092F Datasheet
Additional preview pages of the BM2P092F datasheet.

📁 Similar Datasheet

  • BM20 - Bluetooth 4.1 Stereo Audio-Module (ISSC)
  • BM2262 - Remote control coding IC (Bookly)
  • BM23 - Bluetooth 4.1 Stereo Audio-Module (ISSC)
  • BM2300 - N-Channel Enhancement Mode MOSFET (Bookly)
  • BM2301 - P-Channel MOSFET (Bookly)
  • BM2302 - N-Channel MOSFET (Bookly)
  • BM2320-7 - 50 Watt DC-DC Converters (Power-One)
  • BM2341 - P-Channel Enhancement Mode MOSFET (Bookly)
  • BM24-10DP - Height Hybrid Power/Signal Connectors (HIROSE)
  • BM24-10DS - Height Hybrid Power/Signal Connectors (HIROSE)
Other Datasheets by ROHM

Full PDF Text Transcription

Click to expand full text
Datasheet AC/DC Drivers PWM type DC/DC converter IC Included 650V MOSFET BM2PXX2F Series ●General The PWM type DC/DC converter (BM2PXX2F) for AC/DC provide an optimum system for all products that include an electrical outlet. BM2PXX2F supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters. BM2PXX2F built in a HV starter circuit that tolerates 650V, it contributes to low-power consumption. With current detection resistors as external devices, a higher degree of design freedom is achieved. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The switching frequency is 65 kHz.
Published: |