Datasheet4U Logo Datasheet4U.com

BD6373GW - 6-Channel System Lens Driver

Description

The BD6373GW is a motor driver that integrates 6 Full-ON type H-Bridges.

The device is intended to drive a stepping motor for auto focus system, and another stepping motor for either zoom or iris.

It can also be used to drive an actuator of the new system like a lens barrier.

Features

  • Low ON-Resistance Power CMOS Output.
  • Drive Mode Switch Function.
  • Under Voltage Locked Out Protection & Thermal Shut Down Circuit Key Specifications.
  • Power Supply Voltage Range: 2.5V to 5.5V.
  • Motor Power Supply Voltage Range: 2.5V to 5.5V.
  • Circuit Current(No Signal & No Load): 1.0mA(Typ).
  • Control Input Voltage: 0V to VCCV.
  • H-Bridge Output Current: -0.5A/ch to +0.5A/ch.
  • Output ON-Resistance(Each Channel): 1.2Ω(Typ).
  • Operating Temperatur.

📥 Download Datasheet

Datasheet Details

Part number BD6373GW
Manufacturer ROHM
File Size 617.43 KB
Description 6-Channel System Lens Driver
Datasheet download datasheet BD6373GW Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD637 Silicon NPN Power Transistor Inchange Semiconductor
BD633 Silicon NPN Power Transistor INCHANGE
BD634 Silicon PNP Power Transistor Inchange Semiconductor
BD635 Silicon NPN Power Transistor Inchange Semiconductor
BD636 Silicon PNP Power Transistor INCHANGE

Other Datasheets by ROHM

Part Number Description
BD63730EFV Voltage Stepping Motor Driver
BD6370GUL 5-Channel System Lens Driver
BD63710AEFV 36V High-performance High-reliability Withstand Voltage Stepping Motor Driver
BD63715AEFV High-reliability Withstand Voltage Stepping Motor Driver
BD63720AEFV High-reliability Withstand Voltage Stepping Motor Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Motor Drivers for Digital Still Cameras 6-Channel System Lens Driver for Digital Still Cameras BD6373GW General Description The BD6373GW is a motor driver that integrates 6 Full-ON type H-Bridges. The device is intended to drive a stepping motor for auto focus system, and another stepping motor for either zoom or iris. It can also be used to drive an actuator of the new system like a lens barrier. Features  Low ON-Resistance Power CMOS Output  Drive Mode Switch Function  Under Voltage Locked Out Protection & Thermal Shut Down Circuit Key Specifications  Power Supply Voltage Range: 2.5V to 5.5V  Motor Power Supply Voltage Range: 2.5V to 5.5V  Circuit Current(No Signal & No Load): 1.0mA(Typ)  Control Input Voltage: 0V to VCCV  H-Bridge Output Current: -0.