Datasheet4U Logo Datasheet4U.com

BD37068FV-M - Sound Processor

Description

It is built-in input selector of 6 stereo source and output to ADC after adjusting signal level.

And built-in 2nd order post filter to reduce out of band noise and 6ch Volume circuit.

It is possible to out until 5.2VRMS at maximum output.

Features

  • AEC-Q100 (Grade3) Qualified.
  • Built-in differential input selector that can select single-ended / differential input.
  • Reduce the pop noise when switching gain due to built-in advanced switch circuit.
  • Less out-of-band noise of DAC by built-in 2nd order post filter.
  • Built-in buffered ground isolation amplifier to realize high CMRR characteristics.
  • Built-in TDMA noise reduction circuit reduces the additional components for external filter.
  • It is possible to outp.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BD375 NPN Epitaxial Silicon Transistor Fairchild Semiconductor
BD375 NPN Transistor INCHANGE
BD376 PNP Epitaxial Silicon Transistor Fairchild Semiconductor
BD376 PNP Transistor INCHANGE
BD377 NPN Epitaxial Silicon Transistor Fairchild Semiconductor

Other Datasheets by ROHM

Part Number Description
BD37067FV-M Sound Processor
BD37069FV-M Sound Processor
BD3702FV Silicon Monolithic Integrated Circuit
BD37033FV-M Sound Processor
BD37034FV-M General-Purpose Electronic Volume

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Analog Sound Processors series Sound Processor for car audio built-in High-Voltage function and 2nd order post filter BD37068FV-M General Description It is built-in input selector of 6 stereo source and output to ADC after adjusting signal level. And built-in 2nd order post filter to reduce out of band noise and 6ch Volume circuit. It is possible to out until 5.2VRMS at maximum output. (High Voltage function) Moreover, it is simple to design set by built-in TDMA noise reduction systems. Features  AEC-Q100 (Grade3) Qualified  Built-in differential input selector that can select single-ended / differential input  Reduce the pop noise when switching gain due to built-in advanced switch circuit  Less out-of-band noise of DAC by built-in 2nd order post filter.
Published: |