Datasheet4U Logo Datasheet4U.com

R5325X - 150mA 2ch LDO REGULATOR

General Description

Pin No.

Pin No.

Key Features

  • Input Voltage 1.5V to 6.0V Output Voltage 1.2V to 4.0V High Output Voltage Accuracy ±1.0% (VOUT > = 1.5V) Low Supply Current Typ. 3.0µA (VR1, VR2) Standby Current Typ. 0.1µA (VR1,VR2) Low Dropout Voltage Typ. 0.2V (IOUT=150mA ,VOUT=3.0V) High Ripple Rejection Typ. 55dB (f=1kHz) Built-in fold-back protection circuit Typ. 50mA (Current at short mode) Low.

📥 Download Datasheet

Datasheet Details

Part number R5325X
Manufacturer RICOH
File Size 671.87 KB
Description 150mA 2ch LDO REGULATOR
Datasheet download datasheet R5325X Datasheet

Other Datasheets by RICOH

Part Number Description
R5324D CMOD 3 CH LDOs
R5328K Low Voltage 3-Mode Dual 150mA LDO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com R5325x SERIES 150mA 2ch LDO REGULATOR NO.EA-127-0606 OUTLINE The R5325x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current (Typ. 3.0µA), low dropout, and fast transient response. Each of these voltage regulator ICs consists of a voltage reference unit, an error amplifier, resistors for setting output voltage, a current limit circuit, and a chip enable circuit. These ICs perform with low dropout voltage due to built-in transistor with low ON resistance, and a chip enable function prolongs the battery life of each system. The line transient response and load transient response of the R5325x Series are excellent, thus these ICs are very suitable for the power supply for hand-held communication equipment.