SF2024E-2 Datasheet | RF Monolithics

Preliminary - - - - - Designed for SDARS Receiver IF Application Low Insertion Loss 3.0 X 3.0 X 1.0 mm Surface-mount Case Differential Input and Output plies with Directive 2002/95/EC (Ro HS) Pb Value +10 30 -40 to +85 -40 to +85 Absolute Maximum Ratings Rating Maximum Incident Power in Passband Maximum DC Voltage on any Non-ground Terminals Operating Temperature Range Storage Temperature Range in Tape and Reel Suitable for Lead-free Soldering - Maximum Soldering Profile 467.751 MHz SAW Filter Units d Bm VDC °C °C 260 °C for 30 s SM3030-8 Min Electrical Characteristics Characteristic Center Frequency Insertion Loss Amplitude Ripple: fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz 2.0 d B Bandwidth Centered at fc 3.0 d B Bandwidth Low Side Attenuation Between 455.751 to 457.251 MHz (fc-10.5 MHz) Low Side Attenuation Below 455.751 MHz High Side Attenuation Between 476.751 to 479.751 MHz (fc+9.0 MHz) High Side Attenuation Above 479.751 MHz Temperature Coefficient of frequency Group Delay Ripple: fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 Sym f C IL Notes Typ 467.751 12 0.74 0.4 0.4 0.5 0.3 0.9 13.0 13.9 37 33 27 38 Max 467.798 14.5 2.0 2.0 2.0 2.0 2.0 2.0 Units MHz d B d BP-P 1, 2 MHz .Data Sheet.net/ 32 28 20 32 d B -18 1, 2, 3 ppm/K 43 100 27 100 20 120 ns P-P 27 120 27 100 32 100 SM3030-8 3.0 x 3.0 mm Nominal Footprint TBD YWWS CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. 2. 3. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted...