RF2486 Datasheet | RF Micro Devices

Description The RF2486 is a monolithic integrated receiver front-end for PCS, PHS, and WLAN applications. The IC contains all of the required ponents to implement the RF functions of the receiver front-end except for the passive filtering and LO generation. It contains an LNA (low-noise amplifiers), a double-balanced Gilbert cell mixer, a balanced IF output, an LO isolation buffer amplifier, and an LO output buffer amplifier for providing the buffered LO signal as an output. The IC is designed to operate from a single 3.6V power supply. 0.157 0.150 0.0098 0.0040 0.344 0.337 0.012 0.008 0.025 0.0688 0.0532 0.2440 0.2284 8°MAX 0°MIN 0.0098 0.0075 0.050 0.016 Optimum Technology Matching® Applied Package Style: SSOP-24 üSi Bi-CMOS NC 1 VCC1 2 VCC2 3 GND1 4 LNA IN 5 GND2 6 GND3 7 NC 8 GND4 9 VCC3 10 LO BUFF EN 11 LO IN 12 Si BJT Ga As HBT Si Ge HBT Ga As MESFET Si CMOS 24 NC 23 GND9 22 VCC4 21 GND8 20 LNA OUT 19 GND7 18 MIX RF IN 17 GND6 16 IF15 IF+ 14 GND5 13 LO BUFF OUT Features - plete Receiver Front-End - High Dynamic Range - Single 3.6V Power Supply - External LNA IP3 Adjustment - 1500MHz to 2500MHz Operation Ordering Information RF2486 PCS Low Noise Amplifier/Mixer RF2486 PCBA-L Fully Assembled Evaluation Board 1.96GHz RF2486 PCBA-H Fully Assembled Evaluation Board 2.4GHz RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://.rfmd. Functional Block Diagram Rev A7 010717 8-105 FRONT-ENDS Absolute Maximum Ratings Parameter Supply Voltage Input LO and RF Levels Ambient Operating Temperature Storage Temperature Rating -0.5 to 5.5 +6 -40 to +85 -40 to +150 Unit VDC d Bm °C °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described...