Datasheet4U Logo Datasheet4U.com

RF2311 - GENERAL PURPOSE AMPLIFIER

General Description

The RF2311 is a general purpose, low cost low power RF amplifier IC.

The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily cascadable 50 Ω gain block.

Key Features

  • DC to well over 1600MHz Operation.
  • Internally Matched Input and Output.
  • 14dB Small Signal Gain.
  • 4.2dB Noise Figure.
  • +9dBm Output Power.
  • Single 2.7V to 6V Positive Power Supply VCC 1 GND 2 GND 3 RF IN 4 8 RF OUT 7 GND 6 GND 5 GND Ordering Information RF2311 RF2311 PCBA General Purpose Amplifier Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 123.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RF23S-XXXXX-XXXXXX-XXXX CABLE Samtec
RF2001 SAW Filter REYCONNS
RF2001 Fast recovery Diodes Rohm
RF2001NS2D Super Fast Recovery Diode ROHM
RF2001NS2DFH Super Fast Recovery Diode ROHM

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RF2310 WIDEBAND GENERAL PURPOSE AMPLIFIER
RF2312 LINEAR GENERAL PURPOSE AMPLIFIER
RF2314 GENERAL PURPOSE LOW NOISE AMPLIFIER
RF2317 LINEAR CATV AMPLIFIER
RF2318 LINEAR BROADBAND AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RF2311 4 Typical Applications • General Purpose High Bandwidth Gain Blocks • IF or RF Buffer Amplifiers • Broadband Test Equipment • Final PA for Medium Power Applications • Driver Stage for Power Amplifiers GENERAL PURPOSE AMPLIFIER Product Description The RF2311 is a general purpose, low cost low power RF amplifier IC. The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily cascadable 50 Ω gain block. Applications include IF and RF amplification in wireless voice and data communication products operating in frequency bands up to 1600MHz. The gain flatness and high bandwidth make the device suitable for many other applications as well.