Datasheet4U Logo Datasheet4U.com

TXC101 - Multi-channel High data rate Programmable

General Description

3 1.1 Processor Mode Pin Configuration 3 1.2 EEPROM Mode Pin Configuration 4 2.0 Functional Description 5 2.1 TXC101 Processor Mode Application 5 RF Transmitter Matching 5 Antenna Design Considerations 6 PCB Layout Considerations 6 2.2 EEPROM Mode Application 8 3.0 TXC101 Functional Characte

Key Features

  • Modulation: OOK/FSK Frequency Hopping Spread Spectrum capability Operating frequency: 315/433/868/915 MHz Low current consumption (TX current ~ 10mA) Wide Operating supply voltage: 2.2 to 5.4V Low standby current (0.2uA).

📥 Download Datasheet

Datasheet Details

Part number TXC101
Manufacturer RFM
File Size 385.00 KB
Description Multi-channel High data rate Programmable
Datasheet download datasheet TXC101 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TXC-02050 Line Interface Transwitch
TXC-02050C Line Interface Transwitch
TXC-03102 Quad DS1 Framer Transwitch
TXC-03103 Quad T1 Framer Plus Transwitch
TXC-03103B Quad E1 Framer Plus Transwitch

Other Datasheets by RFM

Part Number Description
TXC100 Single chip OOK/ASK/FSK Transmitter IC
TXC102 Multi-channel High tae rate Programmable

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Complies with Directive 2002/95/EC (RoHS) Product Overview TXC101 is a highly integrated single chip, multi-channel, low power, high data rate RF transmitter designed to operate in the unlicensed 315/433/868 and 915 MHz frequency bands. All critical RF and baseband functions are completely integrated in the chip, thus minimizing external component count and simplifying design-ins. Its small size with low power consumption makes it ideal for various short range radio applications. The TXC101 is a dual mode solution. In the Micro controller mode, a generic 10MHz crystal and a low-cost microcontroller are the only requirements to create a complete Transmitter link.