REC3-DR-H1 - DC/DC Converter

RECOM

Download the REC3-DR-H1 datasheet PDF. This datasheet also covers the REC3-SR variant, as both devices belong to the same dc/dc converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The REC3-SR/DR series is a low cost converter containing a built in linear regulator to give a regulated, load independent constant voltage output.

Key Features

Regulated Converters.
Low Cost 3W converter in DIP24 Package.
1kVDC Isolation.
Regulated Output.
Continuous Short Circuit Protection.
Internal SMD design.
3 Pinout Options, 3 Case Styles.
Efficiency to 75 %.

📥 Download Datasheet

REC3-DR-H1 dc/dc converter by RECOM - Datasheet Preview — Note: The manufacturer provides a single datasheet file (REC3-SR-RECOM.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number	REC3-DR-H1
Manufacturer	RECOM
File Size	94.03 KB
Description	DC/DC Converter
Datasheet	REC3-DR-H1 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
REC-S18102AG	Common anode numeric display	RAYCONN
REC000802A	Display Module	Raystar
REC000802AYPP5N00000	OLED	Raystar
REC001602A	OLED	Raystar
REC001602AYPP5N00001	OLED	Raystar

Other Datasheets by RECOM

Part Number	Description
REC3-DRW	DC/DC Converter
REC3-DRW-H	DC/DC Converter
REC3-DRWZ	DC/DC Converter
REC3-DRWZ-H	DC/DC Converter
REC3-SR-H1	DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

Features Regulated Converters ● Low Cost 3W converter in DIP24 Package ● 1kVDC Isolation ● Regulated Output ● Continuous Short Circuit Protection ● Internal SMD design ● 3 Pinout Options, 3 Case Styles. ● Efficiency to 75 % Description The REC3-SR/DR series is a low cost converter containing a built in linear regulator to give a regulated, load independent constant voltage output. The converter is designed to run from a regulated supply and is typically used to provide an isolated output or to generate dual rails from a single rail supply. The converters can deliver 140% rated power for short periods of time to cope with applications with large capacitive loads or high start up currents.