900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pulse

PM4345.223NLT Datasheet Preview

PM4345.223NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series
Height: 2.0mm Max
Footprint: 6.0mm x 5.4mm Max
Current Rating: up to 18.0A
Inductance Range: 0.1uH to 22uH
Shielded construction and compact design
High current, low DCR, and high efficiency
Minimized acoustic noise and minimized leakage flux
200Vdc Isolation between terminal and core
Available in Commercial (PA) and Automotive (PM) grades
Commercial6,7
Automotive6,7
PA4345.101NLT
PA4345.151NLT
PA4345.221NLT
PA4345.241NLT
PA4345.331NLT
PA4345.471NLT
PA4345.561NLT
PA4345.681NLT
PA4345.102NLT
PA4345.122NLT
PA4345.152NLT
PA4345.222NLT
PA4345.332NLT
PA4345.472NLT
PA4345.562NLT
PA4345.682NLT
PA4345.822NLT
PA4345.103NLT
PA4345.153NLT
PA4345.223NLT
PM4345.101NLT
PM4345.151NLT
PM4345.221NLT
PM4345.241NLT
PM4345.331NLT
PM4345.471NLT
PM4345.561NLT
PM4345.681NLT
PM4345.102NLT
PM4345.122NLT
PM4345.152NLT
PM4345.222NLT
PM4345.332NLT
PM4345.472NLT
PM4345.562NLT
PM4345.682NLT
PM4345.822NLT
PM4345.103NLT
PM4345.153NLT
PM4345.223NLT
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Inductance5
100KHz, 1V
Rated
Current
DC Resistance
TYP. MAX.
uH±20%
A
mm
0.10* 18.0 3.6 4.0
0.15* 16.0 3.8 4.6
0.22 15.0
4.0
5.5
0.24 13.0
6.0
7.0
0.33 12.0
6.3
7.3
0.47 11.5 7.3 8.6
0.56 10.7 9.3 11.2
0.68 10.0 11.0 12.4
1.0 7.0 17.5 20.0
1.2 6.2 23.0 28.0
1.5 5.5 26.5 30.5
2.2 4.2 42.0 50.0
3.3 3.3 66.0 76.0
4.7 2.8 103 116
5.6 2.5 112 122
6.8 2.4 130 150
8.2 2.3 148 171
10 2.3 180 199
15 1.9 240 270
22 1.5 350 390
Saturation
Current
A
45.0
27.0
25.0
23.0
21.3
18.0
15.0
12.8
13.7
11.0
9.8
9.0
7.3
5.0
4
3.8
3.5
3.4
2.8
1.8
1
power.pulseelectronics.com
P772. K (06/19) http://www.power.pulseelectronics.com/contact




Pulse

PM4345.223NLT Datasheet Preview

PM4345.223NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
High Current Molded Power Inductor - PA4345.XXXNLT & PM4345.XXXNLT Series
Notes:
1. Actual temperature of the component during system operation (ambient plus
verified in the end application.
temperature rise) must be within the standard operating range.
5. Please note that the inductance tolerance of all parts are ±20%, except .101NLT and
2. The saturation current is the current at which the initial inductance drops approxi-
.151NLT which are ±30%.
mately 30% at the stated ambient temperature. This current is determined by placing 6. Parts shown in bold are standard catalog parts and are available through sample
the compnent in the specified ambient environment and applying a short duration
stock and distribution. Parts in lighter font are available but are not necessarily held
pulse current (to eliminate self-heating effect) to the component.
in sample stock or distribution and lead times may be longer. Please contact Pulse
3. The rated current is the DC current required to raise the component temperature by
for availablity.
approximately 40C. Take note that the components’ performance varies depending 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949
on the system condition. It is suggested that the component be tested at the system
certification. The mechanical dimensions are 100% tested in production but do not
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 125C under worst
necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly
conform to PPAP.
case operating conditions. Circuit design, PCB trace size and thickness, airflow and 8. Special characteristics
other cooling provisions all affect the part temperature. Part temperature should be
PA4345/PM4345
Mechanical
Final Layout
SUGGESTED PAD LAYOUT
Series A B C D E F G H
PA4345/PM4345
6.0 Max
5.4 Max
2.0 Max
(2.5)
(3.5)
(2.8)
(2.0)
(2.2)
All Dimensions in mm.
TAPE & REEL INFO
WA
K0 P1
Direction of tape
G
PA4545/PM4345
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
TAPE SIZE (mm)
A G P1 W
Ø330 12 8 12
K0
2.3
QTY
PCS/REEL
3000
2
power.pulseelectronics.com
P772. K (06/19) http://www.power.pulseelectronics.com/contact


Part Number PM4345.223NLT
Description SMT Power Inductors
Maker Pulse
PDF Download

PM4345.223NLT Datasheet PDF






Similar Datasheet

1 PM4345.223NLT SMT Power Inductors
Pulse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy