900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pulse

PH0811CNL Datasheet Preview

PH0811CNL Datasheet

HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS

No Preview Available !

HIGH FREQUENCY FLAT COIL
PLANAR TRANSFORMERS
PH08XXCNL Series (up to 160W)
Power Rating: up to 160 W
Height: 9.1mm to 10.1mm Max
Footprint: 24.7mm x 21.6mm Max
Frequency Range: 200kHz to 700kHz
Isolation (Primary to Secondary): 1500 VDC
Patented: US Pat 9378885
Part³
Number
PH0801CNL
PH0802CNL
PH0803CNL
PH0804CNL
PH0805CNL
PH0806CNL
PH0807CNL
PH0808CNL
PH0809CNL
PH0810CNL
PH0811CNL
PH0812CNL
PH0813CNL
PH0814CNL
PH0815CNL
PH08XXCNL
Primary A
4T
4T
5T
5T
6T
4T
4T
5T
5T
6T
4T
4T
5T
5T
6T
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Turns
Schematic
Primary B Secondary
Primary ¹
Inductance
(µ MIN)
Leakage²
Inductance
(µ MAX)
DCR (mΩ MAX)
Primary A Primary B Secondary
4T
153 0.45 8.5
8.5
5T 4T
5T (1T:1T:1T:1T)
A1
194 0.45 8.5 12.5
240 0.55 12.5 12.5
7
6T 290 0.60 12.5 14.2
6T 345 0.65 14.2 14.2
4T
153 0.45 8.5
8.5
5T
5T 1T & 1T
A2
194 0.55 8.5 12.5
240 0.55 12.5 12.5 1.0 & 1.0
6T 290 0.90 12.5 14.2
6T 345 1.00 14.2 14.2
4T
153 0.45 8.5
8.5
5T
5T 2T & 1T
A3
194 0.45 8.5 12.5
240 0.55 12.5 12.5 1.75 & 1.75
6T 290 0.65 12.5 14.2
6T 345 0.85 14.2 14.2
Mechanicals
Maximum
Height
(mm)
9.1
9.6
9.1
9.6
9.1
9.6
10.1
PART NUMBER
SEE TABLE
FOR HEIGHT
Weight ......................11.8 grams
Tape & Reel ..................180/reel
Tray ...............................40/tray
Dimensions:
Inches
mm
Unless otherwise specified,
all tolerances are
±
.010
0.25
1 power.pulseelectronics.com P773.H (02/18) http://www.power.pulseelectronics.com/contact




Pulse

PH0811CNL Datasheet Preview

PH0811CNL Datasheet

HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS

No Preview Available !

HIGH FREQUENCY FLAT COIL
PLANAR TRANSFORMERS
PH08XXCNL Series (up to 160W)
PH08XXCNL
Tape & Reel Layout for PH08XXCNL
Schematics
A1
A2
A3
Notes:
1. Inductance is measured with both primary windings connected in services (2 to 5,
with 3 and 4 shorted).
2. Leakage inductance is measured on winding (2-5) with (3-4) and (7, 8, 9, 10, 11)
shorted.
3. The “NL” suffix indicates an RoHS-compliant part number.
4. It is possible to add a primary side aux.winding to any of the above configurations
as shown in the schematics. Transformers with primary side aux. winding are non-
standard and can be made available upon request. The primary aux. winding can be
between 2 and 16 turns. To add a primary aux. winding to a given base, use the
extension .xxx. For example, to add a 4T aux. winding to the base part number
PH0801CNL, use the part number PH0801.004CNL. The height increases to 10.1mm MAX
for PH0810.xxxCNL. For the other part numbers there is no change to the height..
5. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the
complete number (i.e. PH0801.009CNL becomes PHO0801.009CNLT).
6. To determine if the transformer is suitable for your application, it is necessary to
ensure that the temperature rise of the component (ambient plus temperature rise)
not exceed its operating temperature. To determine the approximate temperature rise
of the transformer, refer to the graphs below.
2 power.pulseelectronics.com P773.H (02/18) http://www.power.pulseelectronics.com/contact


Part Number PH0811CNL
Description HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS
Maker Pulse
Total Page 3 Pages
PDF Download

PH0811CNL Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 PH0811CNL HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS
Pulse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy