PLC03-3.3 Datasheet | Protek Devices

Only One Name Means Pro T ek’Tion™ LOW CAPACIT ANCE TVS ARRA Y APPLICA TIONS ✔ T1/E1 Line Cards ✔ ISDN U-Interfaces & ISDN S/T Interfaces ✔ x DSL Interfaces ✔ Ethernet - 10/100/1000 Base T ✔ Set-Top Box IEC PA TIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15k V, Contact - 8k V ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 94A, L4(Line-Gnd), 48A, L1(Power) & 48A, L4(Line-Line) FEA TURES ✔ 100A (2/10µs) per Bellcore GR1089(Intra-Building) ✔ ESD Protection > 40 kilovolts ✔ 1800 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ LOW CAPACITANCE: 8p F Typical ✔ Tele/Diode Bridge ✔ Ro HS pliant on Lead Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 SO-8 ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Weight 70mg(Approximate) ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code, Logo, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURA TION 05173.R5 4/05 .protekdevices. DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL PPP TJ TSTG VALUE 1800 -55°C to 150°C -55°C to 150°C UNITS Watts °C °C ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING CODE RATED STAND-OFF VOLTAGE MINIMUM SNAP-BACK VOLTAGE MAXIMUM CLAMPING VOLTAGE (Note 1 & 2) (See Fig. 2) @8/20µs VC @ IPP 18.0V @ 100.0A MAXIMUM LEAKAGE CURRENT MAXIMUM MAXIMUM CAPACITANCE CAPACITANCE (See Note 3) (See Note 4) VWM VOLTS PLC03-3.3 PBC 3.0 @ 50m A V(BR) VOLTS 2.8 @VWM ID µA 2.0 @0V, 1 MHz C p F 25 @0V, 1 MHz C p F 12 MAXIMUM CLAMPING VOLTAGE Line-Ground 8/20µs @IP = 50A VC VOLTS 11 Note Note Note Note 1: 2: 3: 4: For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or...