PT2260 - REMOTE CONTROL ENCODER

Description

Code Address Pin Nos.

0 ~ 7 These eight tri-state pins are detected by PT 2260 to determine the encoded waveform bit 0 ~ bit 7.

Each bit can be set to “0”, “1”, or “f” (floating).

Features

• . Thus, this very important feature enables your Encoder/Decoder to operate under the worst environmental condition. ❒ High Performance CMOS Technology ❒ Low Power Consumption ❒ Very High Noise Immunity ❒ Wide Operating Temperature Range: -30oC ~ 70oC ❒ 8 or 10 Tri-State Code Address Pins ❒ 2 or 4 Data Pins ❒ Wider Range of Operating Voltage: 1.8 ~ 10.0 Volts ❒ Single Resistor Oscillator ❒ Least External Components ❒ Home/Car Security System ❒ Garage Door Controller ❒ Remote Fan Controller ❒ Re.