P1Z9AAR900W
P1Z9AAR900W is Phase Control Modules (345-800 Amperes/400-3000 Volts) manufactured by Powerex, Inc.
Description
: Powerex POW-R-BRIK™ Modules are designed for medium and high current power control applications. POW-R-BRIK™ Modules feature an electrically isolated package that simplifies system packaging, installation and cooling. POW-R-BRIK™ Modules utilize pression Bonded Encapsulation (CBE) mounting and double side cooling of the semiconductor elements. The Z7A outline POW-R-BRIK™ uses 33mm or 38mm elements and the Z9A outline POW-R-BRIK™ uses 50mm elements. Standard circuit configurations include Dual SCR, Dual Diode, SCR/Diode, and Diode/SCR. Additional circuit configurations, e.g. Single Element, mon Cathode, mon Anode, and special element types, e.g. Fast Switch SCRs, Fast Recovery Diodes, GTOs, and Transistors are available. Features
: Ⅺ Electrically Isolated Packaging Ⅺ Anodized Aluminum Housing Ⅺ Internal Copper Contacting Ⅺ Gold Element Contacting Ⅺ Internal Temperature Sensor Ⅺ pression Element Contacting Applications:
Mounting Bolt (E) Torque Limit is 11 ft.-lb. Electrical terminal (G) torque limit is 11 ft.-lb. for type Z7A and 20 ft.-lb. for Z9A. Apply a thin coating of thermal joint pound to heat sink surface prior to module mounting. Module weights: Z7A weighs 6 lbs. while the Z9A module weighs 11 lbs. If ining tests are done for isolation voltage, the voltage should be applied in a slow manner rather than abruptly imposed on the device. The voltage should be applied between the top terminals, which must be shorted together, and the metal case. The metal case is anodized and provides added voltage isolation capability if not damaged: factory hi-pot test is achieved without the benefit of the anodized...
